datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : 74AVC16244 74AVC16244DGG Philips
Philips Electronics
Description : 16-BIT BUFFER/LINE DRIVER; 3-STATE (3.6 V tolerant)

DESCRIPTION
The 74AVC16244 is a 16-BIT non-inverting BUFFER/LINE DRIVER with 3-STATE outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer.

FEATURES
• Wide supply voltage range from 1.2 to 3.6 V
• Complies with JEDEC standard no. 8-1A/5/7
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Power off disables 74AVC16244 outputs, permitting live insertion.

View
Part Name(s) : 74AVC16244 74AVC16244DGG NXP
NXP Semiconductors.
Description : 16-BIT BUFFER/LINE DRIVER; 3.6 V tolerant; 3-STATE

General description
The 74AVC16244 is a 16-BIT non-inverting BUFFER/LINE DRIVER with 3-STATE outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer. The 3‑state outputs are controlled by the output enable inputs nOE. A HIGH level on input nOE causes the outputs to assume a high-impedance OFF-state.

Features and benefits
• Wide supply voltage range from 1.2 V to 3.6 V
• Complies with JEDEC standards:
    – JESD8-7 (1.2 V to 1.95 V)
    – JESD8-5 (1.8 V to 2.7 V)
    – JESD8-1A (2.7 V to 3.6 V)
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
• Low inductance multiple VCC and GND pins to minimize noise and ground bounce
• Supports Live Insertion

View
Part Name(s) : 74ALVT16244 74ALVT16244DGG NXP
NXP Semiconductors.
Description : 16-BIT BUFFER/LINE DRIVER; 3-STATE

General description
The 74ALVT16244 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V.
This device is a 16-BIT buffer and line DRIVER featuring non-inverting 3-STATE bus outputs.
The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-BIT buffer.
   
Features and benefits
16-BIT bus interface
3-STATE buffers
• 5V I/O compatible
• Output capability: +64 mA/–32 mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5 V supply
• Bus-hold data inputs eliminate the need for external
    pull-up resistors to hold unused inputs
• Live insertion/extraction permitted
• Power-up 3-STATE
• No bus current loading when output is tied to 5 V bus
• Latch-up protection:
    – JESD17: exceeds 500 mA
• ESD protection:
    – MIL STD 883 method 3015: exceeds 2000 V
    – MM exceeds 200 V
   

View
Part Name(s) : 74ALVCH162244 74ALVCH162244DL ACH162244DL 74ALVCH162244DGG ACH162244DGG Philips
Philips Electronics
Description : 16-BIT BUFFER/LINE DRIVER with 30Ω termination resistor (3-STATE)

DESCRIPTION
The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
The 74ALVCH162244 is a 16-BIT non-inverting BUFFER/LINE DRIVER with 3-STATE outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer. The 3-STATE outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. The 74ALVCH162244 is designed with 30Ω series resistors in both HIGH and LOW output states.
The 74ALVCH162244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

FEATURES
• Wide supply voltage range of 1.2V to 3.6V
• Complies with JEDEC standard no. 8-1A
• CMOS low power consumption
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and ground pins for minimum noise
   and ground bounce
• Direct interface with TTL levels
• Bus hold on all data inputs
• Integrated 30Ω termination resistor

View
Part Name(s) : 16244 74ALVC16244 74ALVCH16244 74ALVC16244DL AC16244DL 74ALVC16244DGG AC16244DGG 74ALVCH16244DL ACH16244DL 74ALVCH16244DGG ACH16244DGG Philips
Philips Electronics
Description : 2.5V/3.3V 16-BIT BUFFER/LINE DRIVER (3-STATE)

DESCRIPTION
The 74ALVC16244(74ALVCH16244) is a 16-BIT non-inverting BUFFER/LINE DRIVER with 3-STATE outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer. The 3-STATE outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state.
The 74ALVCH16244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.
The 74ALVC16244 has 5V tolerant inputs.

FEATURES
• Wide supply voltage range of 1.2V to 3.6V
• Complies with JEDEC standard no. 8-1A
• CMOS low power consumption
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Bus hold on data inputs (74ALVCH16244 only)
• Output drive capability 50Ω transmission lines @ 85°C
• Current drive ±24 mA at 3.0 V

View
Part Name(s) : 74LVT16244BEV Philips
Philips Electronics
Description : 3.3 V LVT 16-BIT buffer/DRIVER (3-STATE)

DESCRIPTION
The 74LVT16244B is a high-performance BiCMOS product designed for VCC operation at 3.3 V.
This device is a 16-BIT buffer and line DRIVER featuring non-inverting 3-STATE bus outputs. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-BIT buffer.

FEATURES
16-BIT bus interface
3-STATE buffers
• Output capability: +64 mA / –32 mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5 V supply
• Bus-hold data inputs eliminate the need for external pull-up resistors to hold unused inputs
• Live insertion/extraction permitted
• Power-up 3-STATE
• No bus current loading when output is tied to 5 V bus
• Latch-up protection exceeds 500 mA per JEDEC Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model

View
Part Name(s) : 74ACT16240 74ACT16240SSC 74ACT16240MTD 74ACT16240SSCX 74ACT16240MTDX Fairchild
Fairchild Semiconductor
Description : 16-BIT Inverting BUFFER/LINE DRIVER with 3-STATE Outputs

General Description
The ACT16240 contains sixteen inverting buffers with 3-STATE outputs designed to be employed as a memory and address DRIVER, clock DRIVER, or bus-oriented transmitter/receiver. The device is nibble controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 16-BIT operation.

Features
■ Separate control logic for each byte
16-BIT version of the ACT240
■ Outputs source/sink 24 mA
■ TTL-compatible inputs

View
Part Name(s) : 74FR16541 74FR16541QC 74FR16541SSC 74FR16541QCX 74FR16541SSCX Fairchild
Fairchild Semiconductor
Description : 16-BIT BUFFER/LINE DRIVER with 3-STATE Outputs

General Description
The 74FR16541 contains sixteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address DRIVER, clock DRIVER, or bus-oriented transmitter/receiver. The device is byte controlled. Each byte has separate 3-STATE control inputs which can be shorted together for full 16-BIT operation.

Features
■ Non-inverting buffers
3-STATE outputs drive bus lines
■ Output sink capability of 64 mA, source capability of 15 mA
■ Separate 3-STATE control pins for each byte
■ Guaranteed multiple output switching, 250 pF delays and pin-to-pin skew
16-BIT version of the 74F541, 74F244 or 74FR244

View
Part Name(s) : 74ALVCH16540 74ALVCH16540DL ACH16540DL ACH16540DGG 74ALVCH16540DGG Philips
Philips Electronics
Description : 2.5V/3.3V 16-BIT BUFFER/LINE DRIVER, inverting, 5V input tolerant (3-STATE)

DESCRIPTION
The 74ALVCH16540 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
The 74ALVCH16540 is a 16-BIT inverting BUFFER/LINE DRIVER with 3-STATE outputs. The 3-STATE outputs are controlled by the output enable inputs 1OEn and 2OEn. A HIGH on nOEn causes the outputs to assume a high impedance OFF-state.
Active bus hold circuitry is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer.

FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A
• CMOS low power consumption
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and ground pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Bus hold on all data inputs eliminates the need for external pull-up resistors to hold unused inputs
• Output drive capability 50Ω transmission lines @ 85°C

View
Part Name(s) : 74FR16540 74FR16540QC 74FR16540SSC 74FR16540QCX 74FR16540SSCX Fairchild
Fairchild Semiconductor
Description : 16-BIT BUFFER/LINE DRIVER with 3-STATE Outputs

General Description
The 74FR16540 contains sixteen inverting buffers with 3-STATE outputs designed to be employed as a memory and address DRIVER, clock DRIVER, or bus-oriented transmitter/ receiver. The device is byte controlled. Each byte has separate 3-STATE control inputs which can be shorted together for full 16-BIT operation.

Features
■ Inverting buffers
3-STATE outputs drive bus lines
■ Output sink capability of 64 mA, source capability of 15 mA
■ Separate 3-STATE control pins for each byte
■ Guaranteed 4000V minimum ESD protection
■ Guaranteed multiple output switching, 250 pF delays and pin-to-pin skew
16-BIT version of the 74F540, 74F240, or 74FR240

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]