datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : NBSG16VS NBSG16VSBA NBSG16VSBAEVB NBSG16VSBAR2 NBSG16VSMN NBSG16VSMNG NBSG16VSMNR2 NBSG16VSMNR2G ON-Semiconductor
ON Semiconductor
Description : 2.5V/3.3V SIGE DIFFERENTIAL RECEIVER/DRIVER WITH VARIABLE OUTPUT SWING View

Description
The NBSG16VS is a DIFFERENTIAL RECEIVER/DRIVER targeted for high frequency applications that require VARIABLE OUTPUT SWING. The device is functionally equivalent to the EP16VS device WITH much higher bandwidth and lower EMI capabilities. This device may be used for applications driving VCSEL lasers. Inputs incorporate internal 50  termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), LVTTL, LVCMOS, CML, or LVDS. The OUTPUT amplitude is varied by applying a voltage to the VCTRL input pin. OUTPUTs are VARIABLE SWING ECL from 100 mV to 750 mV amplitude, optimized for operation from VCC − VEE = 3.0 V to 3.465 V.

Features
• Maximum Input Clock Frequency up to 12 GHz Typical
• Maximum Input Data Rate up to 12 Gb/s Typical
• 40 ps Typical Rise and Fall Times (VCTRL = VCC − 1 V)
• 120 ps Typical Propagation Delay (VCTRL = VCC − 1 V)
VARIABLE SWING PECL OUTPUT WITH Operating Range: VCC = 2.375 V to 3.465 V WITH VEE = 0 V
VARIABLE SWING NECL OUTPUT WITH NECL Inputs WITH
Operating Range: VCC = 0 V WITH VEE = −2.375 V to −3.465 V
OUTPUT Level (100 mV to 750 mV Peak−to−Peak OUTPUT; VCC − VEE = 3.0 V to 3.465 V), DIFFERENTIAL OUTPUT Only
• 50  Internal Input Termination Resistors
• Compatible WITH Existing 2.5 V/3.3 V EP Devices
• VBB and VMM Reference Voltage OUTPUT
• Pb−Free Packages are Available

Part Name(s) : SY100EL16S SY100EL16SKC SY100EL16SZC Micrel
Micrel
Description : 5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER View

DESCRIPTION
The SY100EL16S is a DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. This device is functionally equivalent to he EL16V, WITH an additional input that control the OUTPUT amplitude.

FEATURES
■ 5V power supply options
■ High bandwidth OUTPUT transitions
■ Internal 75KΩ pull-down resistors on inputs
■ Functionally equivalent to SY10/100EL16V WITH VARIABLE OUTPUT SWING
■ Improved OUTPUT waveform characteristics
■ ESD protection of 2000V
■ Available in 8-pin (3mm) TSSOP

Part Name(s) : AZ100LVEL16VS AZ100LVEL16VSD AZ100LVEL16VSDR1 AZ100LVEL16VSDR2 AZ100LVEL16VST AZ100LVEL16VSTR1 AZ100LVEL16VSTR2 AZ10LVEL16VS AZ10LVEL16VSD AZ10LVEL16VSDR1 AZ10LVEL16VSDR2 AZ10LVEL16VST AZ10LVEL16VSTR2 AZ10LVEL16VSTR1 Arizona-Microtek
AZ Microtek
Description : ECL/PECL DIFFERENTIAL Receiver WITH VARIABLE OUTPUT SWING View

DESCRIPTION
The AZ10/100LVEL16VS is a DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. The LVEL16VS has functionality and OUTPUT transition times similar to the EL16, WITH an input that controls the amplitude of the Q/Q¯ OUTPUTs.

FEATURES
• 250ps Propagation Delay
• High Bandwidth OUTPUT Transitions
• Operating Range of 3.0V to 5.5V
• Internal Input Pulldown Resistors
• Functionally Equivalent to ON Semiconductor MC10EL16, MC100EL16 & MC100LVEL16
VARIABLE OUTPUT SWING

Part Name(s) : AZ100EP16VSLG AZ100EP16VSLGR1 AZ100EP16VSLGR2 AZ100EP16VSTG AZ100EP16VSTGR1 AZ100EP16VSTGR2 AZ10EP16VSLG AZ10EP16VSLGR1 AZ10EP16VSLGR2 AZ10EP16VSTG AZ10EP16VSTGR1 AZ10EP16VSTGR2 AZHPGEP16VS AZMG16S AZTPEP16VS AZM
Arizona Microtek, Inc
Description : LVPECL DIFFERENTIAL Receiver WITH VARIABLE OUTPUT SWING View

DESCRIPTION
The AZ10/100EP16VS is a Silicon Germanium (SIGE) DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. The AZ10/100EP16VS has functionality and OUTPUT transition times similar to the AZ10/100EP16, WITH an input that controls the amplitude of the Q/Q¯ OUTPUTs.
The AZ10/100EP16VS is functionally equivalent to the ON Semi MC100EP16VS

FEATURES
• Silicon-Germanium for highspeed operation
• 150ps typical propagation delay
• Available in a 3.0x3.0mm MLP package

APPLICATIONS
• Interfacing WITH very high frequency sources


Part Name(s) : AZ100EP16VS AZ10EP16VS AZ10EP16VSD AZ100EP16VSD AZ10EP16VST AZ100EP16VST AZ10/100EP16VSL AZ10/100EP16VSL+ AZM
Arizona Microtek, Inc
Description : ECL/PECL DIFFERENTIAL Receiver WITH VARIABLE OUTPUT SWING View

DESCRIPTION
The AZ10/100EP16VS is a Silicon–Germanium (SIGE) DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. The EP16VS has functionality and OUTPUT transition times similar to the EP16, WITH an input that controls the amplitude of the Q/Q¯ OUTPUTs.
Connecting the BOOST pin to VEE increases the OUTPUT SWING by about 15% above standard ECL/PECL levels.
The BOOST pin is internally tied to VEE for the SOIC 8 and TSSOP 8 packages, and is under external user control for the MLP 16 package. When both the BOOST pin and the VCTRL pin are not connected, the part operates WITH the standard ECL/PECL OUTPUT and VBB levels of the AZ10/100EP16 device. To ensure best performance, the BOOST pin should be tied to VEE when the VARIABLE SWING feature is used.
The operational range of the EP16VS control input, VCTRL, is from VREF (full SWING) to VCC (min. SWING).
Maximum SWING is achieved by leaving the VCTRL pin open or tied to VEE. Simple control of the OUTPUT SWING can be obtained by a VARIABLE resistor between the VREF and VCC pins, WITH the wiper driving VCTRL. Typical application circuits and results are described in this Data Sheet.
The EP16VS provides a VREF (VBB/VREF) OUTPUT for a DC bias when AC coupling to the device. The VREF pin should be used only as a bias for the EP16VS as its current sink/source capability is limited. Whenever used, the VREF pin should be bypassed to ground via a 0.01μF capacitor.
Under open input conditions for D/D¯, the Q/Q¯ OUTPUTs are not guaranteed.

FEATURES
• Silicon-Germanium for High Speed Operation
• 150ps Typical Propagation Delay
• AZ100EP16VS Functionally Equivalent to ON Semiconductor MC100EP16VS at 3.3V
• Available in a 3x3mm MLP Package
• S-Parameter (.s2p) and IBIS Model Files available on Arizona Microtek Website

Part Name(s) : AZ100EP16VS AZ100EP16VSD AZ100EP16VSL AZ100EP16VSL+ AZ100EP16VST AZ10EP16VS AZ10EP16VSD AZ10EP16VSL AZ10EP16VSL+ AZ10EP16VST AZ10EP16VSDR1 AZ10EP16VSDR2 AZ100EP16VSDR1 AZ100EP16VSDR2 AZ10EP16VSTR1 AZ10EP16VSTR2 AZ100EP16VSTR1 AZ100EP16VSTR2 AZ10EP16VSLR1 AZ10EP16VSLR2 AZ100EP16VSLR1 AZ100EP16VSLR2 Arizona-Microtek
AZ Microtek
Description : ECL/PECL DIFFERENTIAL Receiver WITH VARIABLE OUTPUT SWING View

DESCRIPTION
The AZ10/100EP16VS is a Silicon–Germanium (SIGE) DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. The EP16VS has functionality and OUTPUT transition times similar to the EP16, WITH an input that controls the amplitude of the Q/Q¯ OUTPUTs.

FEATURES
• Silicon-Germanium for High Speed Operation
• 150ps Typical Propagation Delay
• AZ100EP16VS Functionally Equivalent to ON Semiconductor MC100EP16VS at 3.3V
• Available in a 3x3mm MLP Package
• S-Parameter (.s2p) and IBIS Model Files available on Arizona Microtek Website

Part Name(s) : SY100EL16VSKC SY100EL16VSKCTR SY100EL16VSKG SY100EL16VSKGTR SY100EL16VSKI SY100EL16VSKITR SY100EL16VSZC SY100EL16VSZCTR SY100EL16VSZG SY100EL16VSZGTR SY100EL16VSZI SY100EL16VSZITR SY100EL16VS Micrel
Micrel
Description : 5V/3.3V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER View

DESCRIPTION
The SY100EL16VS are DIFFERENTIAL receivers WITH VARIABLE OUTPUT SWING. The devices are functionally equivalent to the EL16V devices WITH an input that control the amplitude of the OUTPUTs.

FEATURES
■ 3.3V and 5V power supply options
■ High bandwidth OUTPUT transitions
■ Internal 75KΩ pull-down resistors on inputs
■ Functionally equivalent to SY100EL16V WITH VARIABLE OUTPUT SWING
■ Improved OUTPUT waveform characteristics
■ Available in 8-pin SOIC and 8-pin (3mm) MSOP

Part Name(s) : AZ100EL16VS AZ100EL16VSL AZ100EL16VSLR1 AZ100EL16VSLR2 AZM16P AZ100EL16VSD AZ100EL16VSDR1 AZ100EL16VSDR2 AZM100EL16VS AZ100EL16VST AZ100EL16VSTR1 AZ100EL16VSTR2 AZH16VS AZ100EL16VSD AZ100EL16VSDR1 AZ100EL16VSDR2 AZ100EL16VSL AZ100EL16VSLR1 AZ100EL16VSLR2 AZ100EL16VST AZ100EL16VSTR1 AZ100EL16VSTR2 AZ100EL16VS Arizona-Microtek
AZ Microtek
Description : ECL/PECL DIFFERENTIAL Receiver WITH VARIABLE OUTPUT SWING View

DESCRIPTION
The AZ100EL16VS is a DIFFERENTIAL receiver WITH VARIABLE OUTPUT SWING. The EL16VS has functionality and OUTPUT transition times similar to the EL16, WITH an input that controls the amplitude of the Q/Q¯ OUTPUTs. Maximum SWING is achieved by leaving the VCTRL pin open or tied to VEE.

FEATURES
• 250ps Propagation Delay
• High Bandwidth OUTPUT Transitions
• 75kΩ Internal Input Pulldown Resistors
• Functionally Equivalent to ON Semiconductor MC100EL16
VARIABLE OUTPUT SWING
• Available in a 3x3mm MLP Package

Part Name(s) : NBSG16 NBSG16BA NBSG16BAEVB NBSG16BAR2 NBSG16MN NBSG16MNG NBSG16MNR2 NBSG16MNR2G ON-Semiconductor
ON Semiconductor
Description : 2.5V/3.3V SIGE DIFFERENTIAL RECEIVER/DRIVER WITH RSECL* OUTPUTs View

*Reduced SWING ECL

Description
The NBSG16 is a DIFFERENTIAL RECEIVER/DRIVER targeted for high frequency applications. The device is functionally equivalent to the EP16 and LVEP16 devices WITH much higher bandwidth and lower
EMI capabilities.
Inputs incorporate internal 50  termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), HSTL, LVTTL, LVCMOS, CML, or LVDS. OUTPUTs are RSECL (Reduced SWING ECL), 400 mV.

Features
• Maximum Input Clock Frequency > 12 GHz Typical
• Maximum Input Data Rate > 12 Gb/s Typical
• 120 ps Typical Propagation Delay
• 40 ps Typical Rise and Fall Times
• RSPECL OUTPUT WITH Operating Range: VCC = 2.375 V to 3.465 V WITH VEE = 0 V
• RSNECL OUTPUT WITH RSNECL or NECL Inputs WITH
Operating Range: VCC = 0 V WITH VEE = −2.375 V to −3.465 V
• RSECL OUTPUT Level (400 mV Peak−to−Peak OUTPUT), DIFFERENTIAL OUTPUT Only
• 50  Internal Input Termination Resistors
• Compatible WITH Existing 2.5 V/3.3 V LVEP, EP, and LVEL Devices
• VBB and VMM Reference Voltage OUTPUT
• Pb−Free Packages are Available

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]