datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : 75ALS181 SN75ALS181N SN75ALS181NSR SN75ALS181NSRG4 SN75ALS181 Texas-Instruments
Texas Instruments
Description : DIFFERENTIAL DRIVER AND RECEIVER PAIR

DESCRIPTION
The SN75ALS181 is a DIFFERENTIAL driver and receiver pair designed for bidirectional data communication on multipoint bus transmission lines. The design provides for balanced transmission lines and meets TIA/EIA-422-B and TIA/EIA-485-A, and CCITT recommendations V.10, V.11, X.26, and X.27.
The SN75ALS181 combines a 3-state DIFFERENTIAL line driver and a DIFFERENTIAL-input line receiver that operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver DIFFERENTIAL outputs and the receiver DIFFERENTIAL inputs are connected to separate pins for greater flexibility and are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage changes, making the device suitable for party-line applications.

FEATURES
• Meets TIA/EIA-422-B, TIA/EIA-485-A, and
   CCITT Recommendations V.11 and X.27
• Low Supply-Current Requirements...
   30 mA Max
• Driver Output Capacity...±60 mA
• Thermal Shutdown Protection
• Driver Common-Mode Output Voltage Range
   of –7 V to 12 V
• Receiver Input Impedance...12 kΩ Min
• Receiver Input Sensitivity...±200 mV
• Receiver Input Hysteresis...60 mV Typ
• Receiver Common-Mode Input Voltage Range
   of ±12 V
• Operates From Single 5-V Supply
• Glitch-Free Power-Up and Power-Down
   Protection

View
Part Name(s) : 75ALS181 SN75ALS181 SN75ALS181N SN75ALS181NE4 SN75ALS181NSLE SN75ALS181NSR SN75ALS181NSRG4 SN75ALS181NS TI
Texas Instruments
Description : DIFFERENTIAL DRIVER AND RECEIVER PAIR

DESCRIPTION
The SN75ALS181 is a DIFFERENTIAL driver and receiver pair designed for bidirectional data communication on multipoint bus transmission lines. The design provides for balanced transmission lines and meets TIA/EIA-422-B and TIA/EIA-485-A, and CCITT recommendations V.10, V.11, X.26, and X.27.
The SN75ALS181 combines a 3-state DIFFERENTIAL line driver and a DIFFERENTIAL-input line receiver that operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver DIFFERENTIAL outputs and the receiver DIFFERENTIAL inputs are connected to separate pins for greater flexibility and are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage changes, making the device suitable for party-line applications.
FEATURES
• Meets TIA/EIA-422-B, TIA/EIA-485-A, and CCITT Recommendations V.11 and X.27
• Low Supply-Current Requirements... 30 mA Max
• Driver Output Capacity...±60 mA
• Thermal Shutdown Protection
• Driver Common-Mode Output Voltage Range of –7 V to 12 V
• Receiver Input Impedance...12 kΩ Min
• Receiver Input Sensitivity...±200 mV
• Receiver Input Hysteresis...60 mV Typ
• Receiver Common-Mode Input Voltage Range of ±12 V
• Operates From Single 5-V Supply
• Glitch-Free Power-Up and Power-Down Protection

View
Part Name(s) : ICS853017 ICS853017AM ICS853017AMT ICST
Integrated Circuit Systems
Description : QUAD, 1-TO-1 DIFFERENTIAL-TO-2.5V/3.3V/5V LVPECL/ECL RECEIVER

GENERAL DESCRIPTION
The ICS853017 is a QUAD 1-to-1, 2.5V/3.3V/5V DIFFERENTIAL LVPECL/ECL receiver and a member of the HiperclocksTM family of High Performance Clock Solutions from ICS. The ICS853017 operates with a positive or negative power supply at 2.5V, 3.3V or 5V, and can accept both single-ended and DIFFERENTIAL inputs. For single-ended operation, an internally generated voltage, which is available on output pin VBB, can be used as a switching bias voltage on the unused input of the DIFFERENTIAL pair. VBB can also be used to rebias AC coupled inputs.

FEATURES
• 4 DIFFERENTIAL LVPECL / ECL 1:1 receivers
• 4 DIFFERENTIAL LVPECL clock input pairs
• PCLKx, nPCLKx pairs can accept the following DIFFERENTIAL input levels: LVPECL, LVDS, CML, SSTL
• Output frequency: >2GHz (typical)
• Translates any single ended input signal to LVPECL levels with resistor bias on nPCLKx input
• Output skew: TBD
• Part-to-part skew: TBD
• Propagation delay: 320ps (typical)
• LVPECL mode operating voltage supply range:
   VCC = 2.375V to 5.25V
• ECL mode operating voltage supply range:
   VCC = 0V, VEE = -5.25V to -2.375V
• -40°C to 85°C ambient operating temperature
• Pin compatible with MC100LVEL17

 

View
Part Name(s) : ICS853017 ICS853017AM ICS853017AMLF ICS853017AMLFT ICS853017AMT IDT
Integrated Device Technology
Description : QUAD, 1-TO-1, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL RECEIVER

GENERAL DESCRIPTION
The ICS853017 is a QUAD 1-to-1, 2.5V/3.3V/5V DIFFERENTIAL LVPECL/ECL receiver and a member of the HiperclocksTM family of High Performance Clock Solutions from IDT. The ICS853017 operates with a positive or negative power supply at 2.5V, 3.3V or 5V, and can accept both single-ended and DIFFERENTIAL inputs. For single ended operation, an internally generated voltage, which is avail able on output pin VBB, can be used as a switching bias voltage on the unused input of the DIFFERENTIAL pair. VBB can also be used to rebias AC coupled inputs.

FEATURES
• Four DIFFERENTIAL LVPECL / ECL 1:1 receivers
• Four DIFFERENTIAL LVPECL clock input pairs
• PCLKx, nPCLKx pairs can accept the following DIFFERENTIAL input levels: LVPECL, LVDS, CML, SSTL
• Output frequency: >2GHz (typical)
• Translates any single ended input signal to LVPECL levels with resistor bias on nPCLKx input
• Output skew: TBD
• Part-to-part skew: TBD
• Propagation delay: 320ps (typical)
• LVPECL mode operating voltage supply range:
   VCC = 2.375V to 5.25V
• ECL mode operating voltage supply range:
   VCC = 0V, VEE = -5.25V to -2.375V
• -40°C to 85°C ambient operating temperature
• Available in both standard (RoHS 5) and lead-free (RoHS 6) packages

 

View
Part Name(s) : MC10H334FN MC10H334L MC10H334P MC10H334 Motorola
Motorola => Freescale
Description : QUAD Bus DRIVER/RECEIVER with Transmit and Receiver Latches

The MC10H334 is a QUAD Bus DRIVER/RECEIVER with transmit and receiver latches. When disabled, (OE = high) the bus outputs will fall to –2.0 V. Data to be transmitted or received is passed through its respective latch when the respective latch enable (DLE and RLE) is at a low level. Information is latched on the positive transition of DLE and RLE. The parameters specified are with 25 Ω loading on the bus drivers and 50 Ω loads on the receivers.

• Propagation Delay, 1.6 ns Typical Data–to–Output
• Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range)
• Voltage Compensated
• MECL 10K–Compatible

View
Part Name(s) : FIN1019 FIN1019M FIN1019MTC FIN1019MTCX FIN1019MX Fairchild
Fairchild Semiconductor
Description : 3.3V LVDS High Speed DIFFERENTIAL DRIVER/RECEIVER

General Description
This driver and receiver pair are designed for high speed interconnects utilizing Low Voltage DIFFERENTIAL Signaling (LVDS) technology. The driver translates LVTTL signals to LVDS levels with a typical DIFFERENTIAL output swing of 350mV and the receiver translates LVDS signals, with a typical DIFFERENTIAL input threshold of 100mV, into LVTTL levels. LVDS technology provides low EMI at ultra low power dissipation even at high frequencies. This device is ideal for high speed clock or data transfer.

Features
■ Greater than 400Mbs data rate
■ 3.3V power supply operation
■ 0.5ns maximum DIFFERENTIAL pulse skew
■ 2.5ns maximum propagation delay
■ Low power dissipation
■ Power-Off protection
■ 100mV receiver input sensitivity
■ Fail safe protection open-circuit, shorted and terminated conditions
■ Meets or exceeds the TIA/EIA-644 LVDS standard
■ Flow-through pinout simplifies PCB layout
■ 14-Lead SOIC and TSSOP packages save space

 

View
Part Name(s) : 5962-9583401Q2A 5962-9583401VFA 5962L9583401VFA 5962L9583401VZA DS90C032E-QML DS90C032QML DS90C032W-QMLV DS90C032WGLQMLV DS90C032WLQMLV Texas-Instruments
Texas Instruments
Description : LVDS QUAD CMOS DIFFERENTIAL Line Receiver

DESCRIPTION
The DS90C032 is a QUAD CMOS DIFFERENTIAL line receiver designed for applications requiring ultra low power dissipation and high data rates.
The DS90C032 accepts low voltage DIFFERENTIAL input signals and translates them to CMOS (TTL compatible) output levels. The receiver supports a TRI-STATE function that may be used to multiplex outputs. The receiver also supports OPEN Failsafe and terminated (100Ω) input Failsafe with the addition of external failsafe biasing. Receiver output will be HIGH for both Failsafe conditions.

FEATURES
• Single Event Latchup (SEL) Immune 120 MeVcm2 /mg
• High Impedance LVDS Inputs with Power-Off.
• Accepts Small Swing (330 mV) DIFFERENTIAL Signal Levels
• Low Power Dissipation
• Low DIFFERENTIAL Skew
• Low Chip to Chip Skew
• Pin Compatible with DS26C32A
• Compatible with IEEE 1596.3 SCI LVDS Standard

View
Part Name(s) : MC10H334 MC10H334FN MC10H334FNG MC10H334FNR2 MC10H334FNR2G MC10H334L ON-Semiconductor
ON Semiconductor
Description : QUAD Bus DRIVER/RECEIVER with Transmit and Receiver Latches

Description
The MC10H334 is a QUAD Bus DRIVER/RECEIVER with transmit and receiver latches. When disabled, (OE = high) the bus outputs will fall to −2.0 V. Data to be transmitted or received is passed through its respective latch when the respective latch enable (DLE and RLE) is at a low level. Information is latched on the positive transition of DLE and RLE. The parameters specified are with 25  loading on the bus drivers and 50  loads on the receivers.

Features
• Propagation Delay, 1.6 ns Typical Data−to−Output
• Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range)
• Voltage Compensated
• MECL 10K™ Compatible
• Pb−Free Packages are Available*

View
Part Name(s) : 6A1176 SN65ALS1176 SN65ALS1176D SN65ALS1176DR SN65ALS1176DRE4 SN65ALS1176P SN65ALS1176DRG4 SN65ALS1176DG4 SN65ALS1176DE4 TI
Texas Instruments
Description : DIFFERENTIAL DRIVER AND RECEIVER PAIRS

description
The SN65ALS1176 DIFFERENTIAL bus transceiver is designed for bidirectional data communication on multipoint bus transmission lines. It is designed for balanced transmission lines and meets TIA/EIA-422-B, TIA/EIA-485-A, and ITU Recommendations V.11 and X.27.
The SN65ALS1176 combines a 3-state DIFFERENTIAL line driver and a DIFFERENTIAL input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver DIFFERENTIAL outputs and the receiver DIFFERENTIAL inputs are connected internally to form a DIFFERENTIAL input/output (I/O) bus port that is designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
The SN65ALS1176 is characterized for operation from –25°C to 85°C.

● Meets or Exceeds the Requirements of TIA/EIA-422-B, TIA/EIA-485-A, and ITU Recommendations V.11 and X.27
● Recommended for PROFIBUS Applications
● Operates at Data Rates up to 35 MBaud
● Operating Temperature Range . . . –25°C to 85°C
● Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
● Low Supply-Current Requirement . . . 30 mA Max
● Wide Positive and Negative Input/Output Bus-Voltage Ranges
● Thermal-Shutdown Protection
● Driver Positive- and Negative-Current Limiting
● Receiver Input Hysteresis
● Glitch-Free Power-Up and Power-Down Protection
● Receiver Open-Circuit Fail-Safe Design
● Package Options Include Plastic
   Small-Outline (D) Package and (P) DIPs

View
Part Name(s) : SN65LVDS048 SN65LVDS048D SN65LVDS048DR SN65LVDS048PW SN65LVDS048PWR TI
Texas Instruments
Description : LVDS QUAD DIFFERENTIAL LINE RECEIVER

description
The SN65LVDS048 is a QUAD DIFFERENTIAL line receiver that implements the electrical characteristics of low-voltage DIFFERENTIAL signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V DIFFERENTIAL standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the QUAD DIFFERENTIAL receivers will provide a valid logical output state with a ±100-mV DIFFERENTIAL input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1 V of ground potential difference between two LVDS nodes.

● >400 Mbps (200 MHz) Signaling Rates
● Flow-Through Pinout Simplifies PCB Layout
● 50 ps Channel-to-Channel Skew (Typ)
● 200 ps DIFFERENTIAL Skew (Typ)
● Propagation Delay Times 2.7 ns (Typ)
● 3.3 V Power Supply Design
● High-Impedance LVDS Inputs on Power Down
● Low-Power Dissipation (40 mW at 3.3 V Static)
● Accepts Small Swing (350 mV) DIFFERENTIAL Signal Levels
● Supports Open, Short, and Terminated Input Fail-Safe
● Industrial Operating Temperature Range (–40°C to 85°C)
● Conforms to TIA/EIA-644 LVDS Standard
● Available in SOIC and TSSOP Packages
● Pin-Compatible With DS90LV048A From National

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]