datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : AP2218 AP2218T-3.3 AP2218T-3.3E1 AP2218T-5.0 AP2218T-5.0E1 BCDSEMI
BCD Semiconductor
Description : 1A LOW DROPOUT Linear Regulator View

General Description
The AP2218 is a low dropout Linear Regulator with a typical dropout of 300mV at 1A output current.
   
Features
• Minimum Guaranteed Output Current: 1A
• Dropout Voltage at IOUT=1A: 300mV
• Output Accuracy: ± 1%
• Low Ground Current
• Internal Current Limit and Thermal Protection
• Reversed-battery and Reversed-lead Insertion
    Protection
• Fast Transient Response
   
Applications
• Power Module
• Set Top Box
• LCD TV
• PDP TV
• Cordless Phone
   

Part Name(s) : FAN1112 FAN1112D FAN1112DX FAN1112S FAN1112SX Fairchild
Fairchild Semiconductor
Description : 1A 1.2V Low Dropout Linear Regulator View

Description
The FAN1112 is a 1.2V low dropout three-terminal Regulator with 1A output current capability. The device has been optimized for low voltage wheretransient response and minimum input voltage are critical.

Features
• Low dropout voltage
• Load regulation: 0.05% typical
• Trimmed current limit
• On-chip thermal limiting
• Standard SOT-223 and TO-252 packages
• Three-terminal fixed 1.2V

Applications
• Post Regulator for switching supplies
• Supply for low-voltage processors

Part Name(s) : TS39103CP518RO TS39103CP525RO TS39103CP533RO TS39103CP550RO TSC
TSC Corporation
Description : 1A Ultra Low Dropout Voltage Regulator with Multi-Function View

General Description
The TS39103 are 1A ultra low dropout Linear voltage Regulators that provide low voltage, high current output from an extremely small package. These Regulators offers extremely low dropout (typically 400mV at 1A) and very low ground current (typically 12mA at 1A).
The TS39103 are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient voltage spikes, logic level enable control and error flag which signals whenever the output falls out of regulation.

Features
● Dropout voltage typically 0.4V @Io=1.0A
● Output Current up to 1A
● Low Ground Current
● Extremely Fast Transient Response
● Reversed Leakage & Reverse Battery Protection
● Current Limit & Thermal Shutdown Protection

Application
● ULDO Linear Regulator for PC add-in Cards
● PowerPCTM Power Supplies
● Battery Powered Equipment
● Consumer and Personal Electronics
● High Efficiency Linear Power Supplies
● SMPS Post Regulator and DC to DC Modules
● High-efficiency Post Regulator for Switching Supply
● Portable Application
● Low-Voltage microcontrollers and Digital Logic

 

Part Name(s) : G1117T41B G1117T41U G1117T42B G1117T42U G1117T43B G1117T43U G1117T43UF G1117T61B G1117T61U G1117T62B G1117T62U G1117T63B G1117T63U G1117T63UF G1117TD1B G1117TD1U G1117TD2B G1117TD2U G1117TD3B G1117TD3U G1117 GMT
Global Mixed-mode Technology Inc
Description : 1A Adjustable Low-Dropout Linear Regulator View

General Description
The G1117 is a low dropout Linear Regulator with a dropout of 1.2V at 800mA of load current and 1.3V at 1A of load current. It is available in an adjustable version, which can set the output from 1.25V to 5V with only two external resistors.
The G1117 provides over temperature and over current protection circuits to prevent it from being damaged by abnormal operating conditions.
The G1117 is available in TO-252, SOT-223 and TO-92 packages. A minimum of 10μF tantalum electrolytic capacitor is required at the output to improve the transient response and stability.

Features
■ Available in adjust version
■ Space saving TO-252, SOT-223 and TO-92 package
■ Internal short circuit current limiting
■ Internal over temperature protection
■ Output current in excess of 1A
■ Output current in excess of 100mA with TO-92 package

Applications
■ Post regulation for switching DC/DC converter
■ High efficiency Linear Regulator
■ Battery charger
■ Battery powered instrumentation
■ Motherboard


Part Name(s) : H1117EADJ HSMC
Hi-Sincerity Mocroelectronics
Description : 1A LOW DROPOUT POSITIVE VOLTAGE Regulator View

General Description
The H1117E is a 1A Low-Dropout positive voltage Regulator. It is available in fixed and adjustable output voltage versions. Over current and thermal protection are integrated onto the chip. Output current will decrease while it reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.2V Maximum at full rated output current. H1117E Series provides excellent regulation over variations due to changes in line, load and temperature. H1117E is three terminal Regulator and available in popular packages.

Features
• Low Dropout Voltage 1.2V at 1A
• Adjustable or Fixed Voltage
• Maximum Line Regulation 0.45%
• Maximum Load Regulation 0.4%
• Adjust Pin Current Less Than 90 uA
• Over Current Protection
• Thermal Protection

Applications
• High Efficiency Linear Regulators
• 5V to 3.3V Voltage Converter
• Battery Charger

Part Name(s) : AMS1117 AMS1117-2.85 AMS1117-5 AMS11171.2 AMS11171.5 AMS11171.8 AMS11172.5 AMS11172.8 AMS11173.3 AMS11175 AMS1117CD AMS1117 AMS1117-1.2 AMS1117-1.5 AMS1117-1.8 AMS1117-1.9 AMS1117-2.5 AMS1117-3.3 AMS1117-5.0 AMS1117-ADJ AMS1117-XXX AMS
Advanced Monolithic Systems Inc
Description : 1A Adjustable/Fixed Low Dropout Linear Regulator View

1A Adjustable/Fixed Low Dropout Linear Regulator

General Description
The AMS1117-ADJ and AMS1117-1.2,-1.5,-1.8,-2.5,-2.85, -3.3 and-5 are low dropout three-terminal Regulators with 1A output current capability. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The 2.85V version is designed specifically to be used in Active Terminators for SCSI bus.

Key Features
- Low dropout voltage
- Load regulation: 0.2% typical
- Optimized for Low Voltage
- On-chip thermal limiting
- Standard SOT-223 and TO-252 packages
- Three-terminal adjustable or fixed low dropout
   1.2V,1.5V,1.8V, 2.5V, 2.85V, 3.3V, 5V. Regulators

Applications
- Active SCSI terminators
- High efficiency Linear Regulators
- Post Regulators for switching supplies
- Battery chargers
- 12V to 5V Linear Regulators
- Motherboard clock supplies

Part Name(s) : RC1117X25 RC1117X285 RC1117X5 Fairchild
Fairchild Semiconductor
Description : 1A Adjustable/Fixed Low Dropout Linear Regulator View

Description
The RC1117 and RC1117-2.5, -2.85, -3.3 and -5 are low dropout three-terminal Regulators with 1A output current capability. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The 2.85V version is designed specifically to be used in Active Terminators for SCSI bus.
   
Features
• Low dropout voltage
• Load regulation: 0.05% typical
• Trimmed current limit
• On-chip thermal limiting
• Standard SOT-223, TO-263, and TO-252 packages
• Three-terminal adjustable or fixed 2.5V, 2.85V, 3.3V, 5V
   
Applications
• Active SCSI terminators
• High efficiency Linear Regulators
• Post Regulators for switching supplies
• Battery chargers
• 5V to 3.3V Linear Regulators
• Motherboard clock supplies
   

Part Name(s) : G9105 G9105P11U G9105TF1T G9105TF1TF G9105TH1T G9105TH1TF GMT
Global Mixed-mode Technology Inc
Description : 5V 1A Low Dropout Regulator with Enable View

General Description
The G9105 positive 5V voltage Regulator features the ability to source 1A of output current. The dropout voltage is 0.5V at 1A output current. The typical quiescent current is 5mA. Furthermore, the quiescent current is smaller when the Regulator is in the dropout mode (VIN < 5.5V).

Features
  Dropout voltage 0.5V @ IO= 1A
  Output current in excess of 1A
  Output voltage accuracy ±2.5%
  Quiescent current, typically 5mA
  Internal short circuit current limit
  Internal over temperature protection
  ON/OFF control

Part Name(s) : CS5201-3 CS5201-3GT3 CS5201-3GDP3 CS5201-3GDPR3 CS5201-3GST3 CS5201-3GSTR3 Cherry-Semiconductor
Cherry semiconductor
Description : 1A, 3.3V Fixed Linear Regulator View

Description
The CS5201-3 Linear Regulator provides a 1A@ 3.3V reference at 1A with an output voltage accuracy of ±1.5%.
This Regulator is intended for use as a post Regulator and microprocessor supply. The fast loop response and low dropout voltage make this Regulator ideal for applications where low voltage operation and good transient response are important.
The circuit is designed to operate with dropout voltages less than 1.2V at 1A output current.

Features
■ Output Current to 1A
■ Output Accuracy to ±1.5% Over Temperature
■ Dropout Voltage (typical) 1.0V @ 1A
■ Fast Transient Response
■ Fault Protection Current Limit Thermal Shutdown

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]