datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 74ALVCH16501 74ALVCH16501DGG Philips
Philips Electronics
Description : 18-BIT UNIVERSAL BUS TRANSCEIVER (3-STATE) View

DESCRIPTION
The 74ALVCH16501 is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is High. When LEAB is Low, the A data is latched if CPAB is held at a High or Low logic level. If LEAB is Low, the A-BUS data is stored in the latch/flip-flop on the Low-to-High transition of CPAB. When OEAB is High, the OUTPUTS are active. When OEAB is Low, the OUTPUTS are in the high-impedance state.

FEATURES
• Complies WITH JEDEC standard no. 8-1A.
• CMOS low power consumption
• Direct interface WITH TTL levels
• Current drive ± 24 mA at 3.0 V
UNIVERSAL BUS TRANSCEIVER WITH D-type latches and D-type flip-flops capable of operating in transparent, latched or clocked mode.
• All inputs have BUShold circuitry
• Output drive capability 50Ω transmission lines @ 85°C
3-STATE non-inverting OUTPUTS for BUS oriented applications

Part Name(s) : 74LVT16501A 74LVT16501ADGG 74LVT16501ADL NXP
NXP Semiconductors.
Description : 3.3 V LVT 18-BIT UNIVERSAL BUS TRANSCEIVER; 3-STATE View

General description
The 74LVT16501A is a high-performance BiCMOS product designed for VCC operation at 3.3 V. This device is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.
   
Features
18-BIT bidirectional BUS interface
3-STATE buffers
■ Output capability: +64 mA to −32 mA
■ TTL input and output switching levels
■ Input and output interface capability to systems at 5 V supply
BUS hold data inputs eliminate need for external pull-up
    resistors to hold unused inputs
■ Live insertion and extraction permitted
■ Power-up reset
■ Power-up 3-STATE
■ No BUS current loading when output is tied to 5 V BUS
■ Positive-edge triggered clock inputs
■ Latch-up protection:
    ◆ JESD78: exceeds 500 mA
■ ESD protection:
    ◆ MIL STD 883, method 3015: exceeds 2000 V
    ◆ Machine model: exceeds 200 V
   

Part Name(s) : 74ABT16501A 74ABT16501ADGG 74ABT16501ADL 74ABTH16501A 74ABTH16501ADGG 74ABTH16501ADL BT16501ADL BT16501ADGG BH16501ADL BH16501ADGG Philips
Philips Electronics
Description : 18-BIT UNIVERSAL BUS TRANSCEIVER (3-STATE) View

DESCRIPTION
The 74ABT16501A high-performance BiCMOS device combines low static and dynamic power dissipation WITH high speed and high output drive.
This device is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.

FEATURES
18-BIT bidirectional BUS interface
3-STATE buffers
• Output capability: +64mA/-32mA
• TTL input and output switching levels
• 74ABTH16501A incorporates BUS-hold data inputs which eliminate the need for external pull-up resistors to hold unused inputs
• Live insertion/extraction permitted
• Power-up reset
• Power-up 3-STATE
• Positive edge-triggered clock inputs
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model
• Flexible operation permits 18 embedded D-type latches or flip-flops to operate in clocked, transparent, and latched modes.

Part Name(s) : 74ALVCH162601 74ALVCH162601DGG Philips
Philips Electronics
Description : 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 30 Ω termination resistor; 3-STATE View

DESCRIPTION
The 74ALVCH162601 is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.
   
FEATURES
• Complies WITH JEDEC standard
    no. 8-1A
• CMOS low power consumption
• Direct interface WITH TTL levels
• MULTIBYTE™ flow-through
    standard pin-out architecture
• Low inductance multiple VCC and
    ground pins for minimum noise and
    ground bounce
• All data inputs have BUS hold
    circuitry
• Integrated 30 Ω termination
    resistors.
   


Part Name(s) : 74ALVCH162601 74ALVCH162601DGG 74ALVCH162601DGG,1 74ALVCH162601DGG1 NXP
NXP Semiconductors.
Description : 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 30 Ω termination resistor; 3-STATE View

DESCRIPTION
The 74ALVCH162601 is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.
   
FEATURES
• Complies WITH JEDEC standard
    no. 8-1A
• CMOS low power consumption
• Direct interface WITH TTL levels
• MULTIBYTE™ flow-through
    standard pin-out architecture
• Low inductance multiple VCC and
    ground pins for minimum noise and
    ground bounce
• All data inputs have BUS hold
    circuitry
• Integrated 30 Ω termination
    resistors.
   

Part Name(s) : IDT74FCT163601 IDT74FCT163601A IDT74FCT163601PV IDT74FCT163601PA IDT74FCT163601PF IDT74FCT163601APV IDT74FCT163601APA IDT74FCT163601APF IDT
Integrated Device Technology
Description : 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS View

DESCRIPTION:
The FCT163601/A 18-BIT registered TRANSCEIVER is built using advanced dual metal CMOS technology. These 18-BIT UNIVERSAL BUS TRANSCEIVERs combine D-type latches and Dtype flip-flops to allow data flow in transparent, latched and clocked modes.

FEATURES:
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
• Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP and 15.7 mil pitch TVSOP
• Extended commercial range of -40°C to +85°C
• VCC = 3.3V ±0.3V, Normal Range or VCC = 2.7 to 3.6V, Extended Range
• CMOS power levels (0.4µW typ. static)
• Rail-to-Rail output swing for increased noise margin
• Low Ground Bounce (0.3V typ.)
• Inputs (except I/O) can be driven by 3.3V or 5V components

Part Name(s) : 74LVT16501A 74LVT16501ADL 74LVT16501ADGG 74LVT16501A 74LVT16501ADGG 74LVT16501ADL VT16501ADL VT16501ADGG Philips
Philips Electronics
Description : 3.3V 18-BIT UNIVERSAL BUS TRANSCEIVER (3-STATE) View

General description
The 74LVT16501A is a high-performance BiCMOS product designed for VCC operation at 3.3 V. This device is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.
   
Features
18-BIT bidirectional BUS interface
3-STATE buffers
■ Output capability: +64 mA to −32 mA
■ TTL input and output switching levels
■ Input and output interface capability to systems at 5 V supply
BUS hold data inputs eliminate need for external pull-up
    resistors to hold unused inputs
■ Live insertion and extraction permitted
■ Power-up reset
■ Power-up 3-STATE
■ No BUS current loading when output is tied to 5 V BUS
■ Positive-edge triggered clock inputs
■ Latch-up protection:
    ◆ JESD78: exceeds 500 mA
■ ESD protection:
    ◆ MIL STD 883, method 3015: exceeds 2000 V
    ◆ Machine model: exceeds 200 V
   

Part Name(s) : 74ALVT16501 74ALVT16501DGG 74ALVT16501DGG,112 74ALVT16501DL 74ALVT16501DL,512 74ALVT16501DL,518 74ALVT16501DGG,118 NXP
NXP Semiconductors.
Description : 18-BIT UNIVERSAL BUS TRANSCEIVER; 3-STATE View

General description
The 74ALVT16501 is a high-performance Bipolar Complementary Metal Oxide Semiconductor (BiCMOS) product designed for VCC operation at 2.5 V and 3.3 V WITH I/O compatibility up to 5 V. This device is an 18-BIT UNIVERSAL TRANSCEIVER featuring non-inverting 3-STATE BUS compatible OUTPUTS in both send and receive directions.

Features
18-BIT bidirectional BUS interface
■ 5 V I/O compatible
3-STATE buffers
■ Output capability: +64 mA to −32 mA
■ TTL and LVTTL input and output switching levels
BUS hold data inputs eliminate the need for external pull-up resistors to hold unused inputs
■ Live insertion and extraction permitted
■ Power-up reset
■ Power-up 3-STATE
■ No BUS current loading when output is tied to 5 V BUS
■ Positive-edge triggered clock inputs
■ Latch-up protection:
    ◆ JESD78: exceeds 500 mA
■ ESD protection:
    ◆ MIL STD 883, method 3015: exceeds 2000 V
    ◆ Machine model: exceeds 400 V

Part Name(s) : HD74ALVCH16835 Hitachi
Hitachi -> Renesas Electronics
Description : 18-BIT UNIVERSAL BUS Driver WITH 3-STATE OUTPUTS View

Description
The HD74ALVCH16835 is an 18-BIT UNIVERSAL BUS driver designed for 2.3 V to 3.6 V VCC operation.

Features
• Supports unregulated battery operation down to 2.7 V
BUS hold on data inputs eliminates the need for external pullup resistors.
• Distrlbuted VCC and GND pin conflguration minimizes high speed switching noise.

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]