datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 74ABT162244 74ABT162244DGG 74ABT162244DL 74ABT162244 74ABT162244DGG 74ABT162244DL NXP
NXP Semiconductors.
Description : 16-BIT BUFFER/LINE DRIVER WITH 30 ? SERIES TERMINATION RESISTORS; 3-STATE View

General description
The 74ABT162244 high-performance Bipolar CMOS (BiCMOS) device combines low static and dynamic power dissipation WITH high speed and high output drive.
The 74ABT162244 is a 16-BIT buffer that is ideal for driving bus lines. The device features four output enable inputs (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-STATE outputs.
The 74ABT162244 is designed WITH 30SERIES resistance in both the upper and lower output structures. This design reduces line noise in applications such as memory address DRIVERs, clock DRIVERs and bus receivers/transmitters.

Features
16-BIT bus interface
■ Multiple VCC and GND pins minimize switching noise
■ Power-up 3-STATE
3-STATE buffers
■ Output capability: +12 mA and −32 mA
■ Live insertion and extraction permitted
■ Latch-up performance: JESD 78 Class II
■ ESD protection:
   ◆ MIL STD 883 method 3015: exceeds 2000 V
   ◆ CDM JESD 22-C101-C exceeds 1000 V

Part Name(s) : 74LVC162244A 74LVCH162244A 74LVC162244ADL 74LVCH162244ADL 74LVC162244ADGG 74LVCH162244ADGG Philips
Philips Electronics
Description : 16-BIT BUFFER/LINE DRIVER, 30 ? SERIES TERMINATION RESISTORS; 5 V tolerant input/output; 3-STATE View

DESCRIPTION
The 74LVC(H)162244A is a high-performance, low power, low voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. In 3-STATE operation, outputs can handle 5 V. These features allow the use of these devices as a mixed 3.3 and 5 V environment.
   
FEATURES
• 5 V tolerant inputs/outputs for interfacing WITH 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple power and ground pins for
    minimum noise and ground bounce
• Direct interface WITH TTL levels
• Inputs accept voltages up to 5.5 V
• Integrated 30TERMINATION RESISTORS
• All data inputs have bushold (74LVCH162244A only)
• Complies WITH JEDEC standard no. 8-1A
• ESD protection:
    HBM EIA/JESD22-A114-A exceeds 2000 V
    MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 to +85 °C and −40 to +125 °C.
   

Part Name(s) : 74ABT162244 74ABTH162244 74ABT162244DL 74ABT162244DGG 74ABTH162244DL 74ABTH162244DGG BT162244DL BT162244DGG BH162244DL BH162244DGG Philips
Philips Electronics
Description : 16-BIT BUFFER/LINE DRIVER WITH 30? SERIES TERMINATION RESISTORS (3-STATE) View

DESCRIPTION
The 74ABT162244 high-performance BiCMOS device combines low static and dynamic power dissipation WITH high speed.
The 74ABT162244 device is a 16-BIT buffer that is ideal for driving bus lines. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-STATE outputs.
The 74ABT162244 is designed WITH 30SERIES resistance in both the upper and lower output structures. This design reduces line noise in applications such as memory address DRIVERs, clock DRIVERs and bus receivers/transmitters.
The 74ABT162244 is the same as the 74ABT16244-1. The part number has been changed to reflect industry standards.
Two options are available, 74ABT162244 which does not have the bus hold feature and the 74ABTH162244 which incorporates the bus hold feature.

FEATURES
16-BIT bus interface
• Multiple VCC and GND pins minimize switching noise
• Power-up 3-STATE
3-STATE buffers
• Output capability: +12 mA/–32mA
• Live insertion/extraction permitted
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015
   and 200 V per Machine Model
• Same part as 74ABT162244-1
• 74ABTH162244 incorporates bus hold data inputs which eliminate
   the need for external pull–up RESISTORS to hold unused inputs
• Bus-hold data inputs eliminate the need for external pull-up
   RESISTORS to hold unused inputs

Part Name(s) : 74LVT2241 74LVT2241D 74LVT2241DB 74LVT2241PW NXP
NXP Semiconductors.
Description : 3.3 V octal BUFFER/LINE DRIVER WITH 30 ? SERIES TERMINATION RESISTORS; 3-STATE View

General description
The 74LVT2241 high-performance BiCMOS device combines low static and dynamic power dissipation WITH high speed and high output drive.
   
Features and benefits
• Octal bus interface
3-STATE buffers
• Output capability: +12 mA/–12 mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5 V supply
• Bus hold data inputs eliminate need for external pull-up
    RESISTORS to hold unused inputs
• Live insertion and extraction permitted
• Outputs include SERIES resistance of 30 Ω making external TERMINATION RESISTORS
    unnecessary
• Power-up 3-STATE
• No bus current loading when output is tied to 5 V bus
• Latch-up protection
    – JESD17 Class II exceeds 500 mA
• ESD protection:
    – HBM JESD22-A114E exceeds 2000 V
    – MM JESD22-A115-A exceeds 200 V
   


Part Name(s) : 74ALVCH162244 74ALVCH162244DL ACH162244DL 74ALVCH162244DGG ACH162244DGG Philips
Philips Electronics
Description : 16-BIT BUFFER/LINE DRIVER WITH 30? TERMINATION resistor (3-STATE) View

DESCRIPTION
The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
The 74ALVCH162244 is a 16-BIT non-inverting BUFFER/LINE DRIVER WITH 3-STATE outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-BIT buffer. The 3-STATE outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. The 74ALVCH162244 is designed WITH 30SERIES RESISTORS in both HIGH and LOW output states.
The 74ALVCH162244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down RESISTORS.

FEATURES
• Wide supply voltage range of 1.2V to 3.6V
• Complies WITH JEDEC standard no. 8-1A
• CMOS low power consumption
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and ground pins for minimum noise
   and ground bounce
• Direct interface WITH TTL levels
• Bus hold on all data inputs
• Integrated 30TERMINATION resistor

Part Name(s) : 74ALVT162241 74ALVT162241DGG 74ALVT162241DL AV162241DL AV162241DGG Philips
Philips Electronics
Description : 2.5V/3.3V 16-BIT buffer/DRIVER WITH 30? TERMINATION RESISTORS (3-STATE) View

DESCRIPTION
The 74ALVT162241 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V WITH I/O compatibility up to 5V.
   
FEATURES
16-BIT bus interface
• 5V I/O Compatible
3-STATE buffers
• Output capability: +12mA/-12mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5V supply
• Bus-hold data inputs eliminate the need for external pull-up
   RESISTORS to hold unused inputs
• Outputs include SERIES resistance of 30Ω making external
   TERMINATION RESISTORS unnecessary
• Live insertion/extraction permitted
• Power-up 3-STATE
• No bus current loading when output is tied to 5V bus
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000V per MIL STD 883 Method 3015
   and 200V per Machine Model
   

Part Name(s) : 74LVC322244A 74LVCH322244A 74LVC322244AEC 74LVCH322244AEC Philips
Philips Electronics
Description : 32-bit BUFFER/LINE DRIVER; WITH 30 ? SERIES TERMINATION RESISTORS; 5 V input/output tolerant; 3-STATE View

DESCRIPTION
The 74LVC(H)322244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. In 3-STATE operation, outputs can handle 5 V. These features allow the use of these devices in a mixed 3.3 and 5 V environment.

FEATURES
• 5 V tolerant inputs/outputs for interfacing WITH 5 V logic
• Wide supply voltage range of 1.2 to 3.6 V
• CMOS low power consumption
• MULTIBYTE™ flow-trough standard pin-out architecture
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Direct interface WITH TTL levels
• Bus hold on data inputs (74LVCH322244A only)
• Integrated 30TERMINATION RESISTORS
• Typical output ground bounce voltage: VOLP <0.8 V at VCC = 3.3 V; Tamb = 25 °C
• Typical output VOH undershoot voltage: VOHV >2 V at VCC = 3.3 V; Tamb = 25 °C
• Power-off disabled outputs, permitting live insertion
• Plastic fine-pitch ball grid array package.

Part Name(s) : 74LVT2241 74LVT2241PW 74LVT2241D 74LVT2241DB 7LVT2241PWDH Philips
Philips Electronics
Description : 3.3V Octal BUFFER/LINE DRIVER WITH 30? SERIES TERMINATION RESISTORS; 3-STATE View

DESCRIPTION
The 74LVT2241 high-performance BiCMOS device combines low static and dynamic power dissipation WITH high speed and high output drive.
   
FEATURES
• Octal bus interface
3-STATE buffers
• Output capability: +12mA/-12mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5V supply
• Bus-hold data inputs eliminate the need for external pull-up
    RESISTORS to hold unused inputs
• Power-up 3-STATE
• Live insertion/extraction permitted
• No bus current loading when output is tied to 5V bus
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000V per MIL STD 883 Method 3015
    and 200V per Machine Model.
• Outputs include SERIES resistance of 30Ω, making external
    TERMINATION RESISTORS unnecessary.
   

Part Name(s) : 74ABT162245A 74ABTH162245A 74ABT162245ADL 74ABTH162245ADL 74ABT162245ADGG 74ABTH162245ADGG NXP
NXP Semiconductors.
Description : 16-BIT bus transceiver WITH 30 ? SERIES TERMINATION RESISTORS; 3-STATE View

General description
The 74ABT162245A is a high-performance BiCMOS product, which combines low static and dynamic power dissipation WITH high speed.
This device is a 16-BIT transceiver featuring non-inverting 3-STATE bus compatible outputs in both send and receive directions.
   
Features and benefits
16-BIT bidirectional bus interface
• Multiple VCC and GND pins minimize switching noise
3-STATE buffers
• Output capability: +12 mA/–32 mA
• 74ABTH162245A incorporates bus-hold data inputs
    which eliminate the need for external
    pull-up RESISTORS to hold unused inputs
• Integrated 30 Ω TERMINATION RESISTORS
• Power-up 3-STATE
• Latch-up performance: JESD 78 Class II exceeds 500 mA
• ESD protection:
    – HBM JESD-A114E exceeds 2000 V
    – CDM JESD22-C101C exceeds 1000 V
• Specified from -40 °C to +85 °C
   

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]