datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : Octal Buffer/Line Driver with TRI-STATE® Outputs

General Description
The ’FCT244 is an octal buffer and line Driver with TRI-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/receiver.

Features
■ Non-Inverting buffers
■ Output sink capability of 48 mA, source capability of 12 mA
TRI-STATE Outputs drive lines or buffer memory address registers
■ TTL input and output level compatible
■ CMOS power consumption
■ Standard Microcircuit Drawing (SMD) 5962-8763001

Description : 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs

General Description
The ACT16240 contains sixteen Inverting buffers with 3-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/receiver. The device is nibble controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 16-Bit operation.

Features
■ Separate control logic for each byte
16-Bit version of the ACT240
Outputs source/sink 24 mA
■ TTL-compatible inputs

Description : 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs

General Description
The ACT16540 contains sixteen Inverting buffers with 3-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/ receiver. The device is byte controlled. Each byte has separate 3-STATE control inputs which can be shorted together for full 16-Bit operation.

Features
■ Separate control logic for each byte
Outputs source/sink 24 mA
■ TTL-compatible inputs

NXP
NXP Semiconductors.
Description : 16-Bit Buffer/Line Driver with 5V tolerant inputs/Outputs; Inverting; 3-state

General description
The 74LVC16240A is a 16-Bit Inverting Buffer/Line Driver with 3-state Outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-Bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state Outputs. A HIGH on nOE causes the Outputs to assume a high-impedance OFF-state.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the Outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications.

Features and benefits
■ 5 V tolerant inputs/Outputs for interfacing with 5 V logic
■ Wide supply voltage range from 1.2 V to 3.6 V
■ CMOS low power consumption
■ MULTIBYTE flow-through standard pin-out architecture
■ Low inductance multiple power and ground pins for minimum noise and ground bounce
■ Direct interface with TTL levels
■ Complies with JEDEC standard:
    ◆ JESD8-7A (1.65 V to 1.95 V
    ◆ JESD8-5A (2.3 V to 2.7 V
    ◆ JESD8-C/JESD36 (2.7 V to 3.6 V
■ ESD protection:
    ◆ HBM JESD22-A114F exceeds 2000 V
    ◆ MM JESD22-A115B exceeds 200 V
    ◆ CDM JESD22-C101E exceeds 1000 V
■ Specified from -40 °C to +85 °C and from -40 °C to +125 °C.

NEXPERIA
Nexperia B.V. All rights reserved
Description : 16-Bit Buffer/Line Driver with 5V tolerant inputs/Outputs; Inverting; 3-state

General description
The 74LVC16240A is a 16-Bit Inverting Buffer/Line Driver with 3-state Outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-Bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state Outputs. A HIGH on nOE causes the Outputs to assume a high-impedance OFF-state.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the Outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications.

Features and benefits
• 5 V tolerant inputs/Outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low power consumption
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Complies with JEDEC standard:
    • JESD8-7A (1.65 V to 1.95 V)
    • JESD8-5A (2.3 V to 2.7 V)
    • JESD8-C/JESD36 (2.7 V to 3.6 V)
• ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115B exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C.

Description : 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs

General Description
The ACTQ16240 contains sixteen Inverting buffers with 3-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/receiver. The device is nibble controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 16-Bit operation.
The ACTQ16240 utilizes Fairchild’s Quiet Series™ technology to guarantee quiet output switching and improve dynamic threshold performance. FACT Quiet Series™ features GTO output control for superior performance.

Features
■ Utilizes Fairchild’s FACT Quiet Series technology
■ Guaranteed simultaneous switching noise level and
   dynamic threshold performance
■ Guaranteed pin-to-pin output skew
■ Separate control logic for each byte
16-Bit version of the ACTQ240
Outputs source/sink 24 mA
■ Additional specs for multiple output switching
■ Output loading specs for both 50 pF and 250 pF loads

Fairchild
Fairchild Semiconductor
Description : 16-Bit Buffer/Line Driver with 3-STATE Outputs

General Description
The 74FR16541 contains sixteen non-Inverting buffers with 3-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/receiver. The device is byte controlled. Each byte has separate 3-STATE control inputs which can be shorted together for full 16-Bit operation.

Features
■ Non-Inverting buffers
■ 3-STATE Outputs drive bus lines
■ Output sink capability of 64 mA, source capability of 15 mA
■ Separate 3-STATE control pins for each byte
■ Guaranteed multiple output switching, 250 pF delays and pin-to-pin skew
16-Bit version of the 74F541, 74F244 or 74FR244

Integral
Integral Corp.
Description : OCTAL 3-STATE Inverting Buffer/Line Driver/LINE RECEIVER

OCTAL 3-STATE Inverting Buffer/Line Driver/LINE RECEIVER High-Performance Silicon-Gate CMOS

The IN74HC240A is identical in pinout to the LS/ALS240. The device inputs are compatible with standard CMOS Outputs; with pullup resistors, they are compatible with LS/ALSTTL Outputs.
This octal Inverting Buffer/Line Driver/line receiver is designed to be used with 3-state memory address Drivers, clock Drivers, and other bus-oriented systems. The device has Inverting Outputs and two active-low output enables.

Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices

IKSEMICON
IK Semicon Co., Ltd
Description : Octal 3-State Inverting Buffer/Line Driver/Line Receiver

Octal 3-State Inverting Buffer/Line Driver/Line Receiver High-Performance Silicon-Gate CMOS

The IN74HC240A is identical in pinout to the LS/ALS240. The device inputs are compatible with standard CMOS Outputs; with pullup resistors, they are compatible with LS/ALSTTL Outputs.
This octal Inverting Buffer/Line Driver/line receiver is designed to be used with 3-state memory address Drivers, clock Drivers, and other bus oriented systems. The device has Inverting Outputs and two active-low output enables.

Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices

Fairchild
Fairchild Semiconductor
Description : 16-Bit Buffer/Line Driver with 3-STATE Outputs

General Description
The 74FR16540 contains sixteen Inverting buffers with 3-STATE Outputs designed to be employed as a memory and address Driver, clock Driver, or bus-oriented transmitter/ receiver. The device is byte controlled. Each byte has separate 3-STATE control inputs which can be shorted together for full 16-Bit operation.

Features
Inverting buffers
■ 3-STATE Outputs drive bus lines
■ Output sink capability of 64 mA, source capability of 15 mA
■ Separate 3-STATE control pins for each byte
■ Guaranteed 4000V minimum ESD protection
■ Guaranteed multiple output switching, 250 pF delays and pin-to-pin skew
16-Bit version of the 74F540, 74F240, or 74FR240

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]