datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : 24C16WP ST24CB1 ST24CB1TR ST24CB3 ST24CB3TR ST24CB6 ST24CB6TR ST24CM1 ST24CM1TR ST24CM3 ST24CM3TR ST24CM6 ST24CM6TR ST24WB1 ST24WB1TR ST24WB3 ST24WB3TR ST24WB6 ST24WB6TR ST24WM1 ST24WM1TR ST24WM3 ST24WM3TR ST24WM6 ST24WM6TR ST-Microelectronics
STMicroelectronics
Description : 16 KBIT SERIAL I2C BUS EEPROM WITH USER-DEFINED BLOCK WRITE PROTECTION

DESCRIPTION
This specification covers a range of 16 KBIT I2C BUS EEPROM products, the ST24/25C16 and the
ST24/25W16. In the text, products are referred to as ST24/25x16 where "x" is: "C" for Standard ver
sion and "W" for hardware WRITE Control version.The ST24/25x16 are 16 KBIT electrically erasable
programmable memories (EEPROM), organized as 8 BLOCKs of 256 x8 bits. These are manufactured
in STMicroelectronics’s Hi-Endurance Advanced CMOS technology which guarantees an endur

 

• 1 MILLION ERASE/WRITE CYCLES, WITH 40 YEARS DATA RETENTION
• SINGLE SUPPLY VOLTAGE:
        – 4.5V to 5.5V for ST24x16 versions
       – 2.5V to 5.5V for ST25x16 versions
• HARDWARE WRITE CONTROL VERSIONS: ST24W16 and ST25W16
• TWO WIRE SERIAL INTERFACE, FULLY I2C BUS COMPATIBLE
• BYTE and MULTIBYTE WRITE (up to 8 BYTES) for the ST24C16
• PAGE WRITE (up to 16 BYTES)
• BYTE, RANDOM and SEQUENTIAL READ MODES
• SELF TIMED PROGRAMING CYCLE
• AUTOMATIC ADDRESS INCREMENTING
• ENHANCED ESD/LATCH UP PERFORMANCES
Reference PDF : 16.pdf" target="_blank">//doc.chipfind.ru/pdf/stmicroelectronics/st24c16.pdf

View
Part Name(s) : M34S32-WBN M34S32-WBN1T M34S32-WBN5T M34S32-WBN6T M34S32-WMN M34S32-WMN1T M34S32-WMN5T M34S32-WMN6T M34S32MN1T M34S32WMN5T M34S32BN1T M34S32MN6T M34S32WMN6T M34S32BN5T M34S32WBN1T M34S32BN6T M34S32WBN5T M34S32WBN6T M34S32MN M34S32MN5T M34S32WMN1T M34S32BN M34S32 ST-Microelectronics
STMicroelectronics
Description : 32K SERIAL I2C BUS EEPROM WITH USER-DEFINED Read-Only BLOCK and 32-Byte OTP Page

DESCRIPTION
The M34S32 is a 32K bit electrically erasable programmable memory (EEPROM), organized as 4096 x 8 bits.
   
■ TWO WIRE I2C SERIAL INTERFACE, SUPPORTS 400kHz PROTOCOL
■ COMPATIBLE WITH I2C EXTENDED ADDRESSING
■ 1 MILLION ERASE/WRITE CYCLES
■ 40 YEARS DATA RETENTION
■ SINGLE SUPPLY VOLTAGE
■ HARDWARE WRITE CONTROL
USER-DEFINED READ-ONLY BLOCK
■ 32 BYTES OTP PAGE
■ BYTE and PAGE WRITE (up to 32 BYTES)
■ BYTE, RANDOM and SEQUENTIAL READ MODES
■ SELF TIMED PROGRAMING CYCLE
■ AUTOMATIC ADDRESS INCREMENTING
■ ENHANCED ESD and LATCH-UP PERFORMANCES
   

View
Part Name(s) : ST24C08 ST24W08 ST25C08 ST25W08 ST24C08B1TR ST24C08B5TR ST24C08B6TR ST24C08B3TR ST24C08M1TR ST24C08M5TR ST24C08M6TR ST24C08M3TR ST24W08B1TR ST24W08B5TR ST24W08B6TR ST24W08B3TR ST24W08M1TR ST24W08M5TR ST24W08M6TR ST24W08M3TR ST25C08B1TR ST25C08B5TR ST25C08B6TR ST25C08B3TR ST25C08M1TR ST-Microelectronics
STMicroelectronics
Description : 8 KBIT SERIAL I2C BUS EEPROM WITH USER-DEFINED BLOCK WRITE PROTECTION

DESCRIPTION
This specification covers a range of 8 KBITs I2C BUS EEPROM products, the ST24/25C08 and the ST24/25W08. In the text, products are referred to as ST24/25x08, where "x" is: "C" for Standard version and "W" for Hardware WRITE Control version.

■ 1 MILLION ERASE/WRITE CYCLES WITH 40 YEARS DATA RETENTION
■ SINGLE SUPPLY VOLTAGE:
    – 3V to 5.5V for ST24x08 versions
    – 2.5V to 5.5V for ST25x08 versions
■ HARDWARE WRITE CONTROL VERSIONS: ST24W08 and ST25W08
■ PROGRAMMABLE WRITE PROTECTION
■ TWO WIRE SERIAL INTERFACE, FULLY I2C BUS COMPATIBLE
■ BYTE and MULTIBYTE WRITE (up to 8 BYTES)
■ PAGE WRITE (up to 16 BYTES)
■ BYTE, RANDOM and SEQUENTIAL READ MODES
■ SELF TIMED PROGRAMMING CYCLE
■ AUTOMATIC ADDRESS INCREMENTING
■ ENHANCED ESD/LATCH UP PERFORMANCES

View
Part Name(s) : M24C16-F M24C16-FTW20I/90 ST-Microelectronics
STMicroelectronics
Description : 16-KBIT SERIAL I2C BUS EEPROM

The M24C16 is a 16-KBIT I2C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 2 K × 8 bits.

View
Part Name(s) : M24128-BRCS3G M24128-BRCS3P M24128-BRCS3TG M24128-BRCS3TP M24128-BRCS5G M24128-BRCS5P M24128-BRCS5TP M2412808 M24C32FMN5TG M24C32RMN5TG M24C64FMN5TG M24C64WMN5G M24C64WMN5P M24C64WMN5TG M24C64WMN5TP ST-Microelectronics
STMicroelectronics
Description : 128 KBIT, 64 KBITand 32 KBIT SERIAL I²C BUS EEPROM

128 KBIT, 64 KBITand 32 KBIT SERIAL I²C BUS EEPROM

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire SERIAL interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance WITH the
I2C BUS definition.

Features
■ Two-wire I2C SERIAL interface upports 400 kHz protocol
■ Single supply voltages (see Ta bl e 1for root art numbers):
   – 2.5 V to 5.5 V
   – 1.8 V to 5.5 V
   – 1.7 V to 5.5 V
WRITE Control input
■ Byte and Page WRITE
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up PROTECTION
■ More than 1 Million WRITE cycles
■ More than 40-year data retention
■ Packages
   –ECOPACK® (RoHS compliant)

View
Part Name(s) : Q67100-H3509 Q67100-H3510 Q67100-H3511 Q67100-H3514 Q67100-H3515 Q67100-H3516 Q67100-H3519 Q67100-H3520 Q67100-H3521 Q67100-H3522 Q67100-H3523 Q67100-H3524 SLA24C08-D-3/P SLA24C08-D/P SLA24C08-S-3/P SLA24C08-S/P SLA24C16-D-3/P SLA24C16-D/P SLA24C16-S-3/P SLA24C16-S/P SLE24C08-D/P SLE24C08-S/P SLE24C16-D/P SLE24C16-S/P SLX24C08/16/P Infineon
Infineon Technologies
Description : 8/16 KBIT (1024/2048 × 8 bit) SERIAL CMOS-EEPROM WITH I2C Synchronous 2-Wire BUS and Page PROTECTION Mode™

Features
• Data EEPROM internally organized as 1024/2048 bytes and 64/128 pages × 16 bytes
• Page PROTECTION mode, flexible page-by-page hardware WRITE PROTECTION
    – Additional PROTECTION EEPROM of 64/128 bits, 1 bit per data page
    – PROTECTION setting for each data page by writing its PROTECTION bit
    – PROTECTION management WITHout switching WP pin
• Low power CMOS
• VCC = 2.7 to 5.5 V operation
• Two wire SERIAL interface BUS, I2C-BUS compatible
• Filtered inputs for noise suppression WITH Schmitt trigger
• Clock frequency up to 400 kHz
• High programming flexibility
    – Internal programming voltage
    – Self timed programming cycle including erase
    – Byte-WRITE and page-WRITE programming, between 1 and 16 bytes
    – Typical programming time 5 ms for up to 16 bytes
• High reliability
    – Endurance 106 cycles1)
    – Data retention 40 years1)
    – ESD PROTECTION 4000 V on all pins
• 8 pin DIP/DSO packages
• Available for extended temperature ranges
    – Industrial: − 40 °C to + 85 °C
    – Automotive: − 40°C to + 125 °C

View
Part Name(s) : SLA24C08-D-3/P SLA24C08-D/P SLA24C08-S-3/P SLA24C08-S/P SLA24C16-D-3/P SLA24C16-D/P SLA24C16-S-3/P SLA24C16-S/P SLE24C08-D/P SLE24C08-S/P SLE24C16-D/P SLE24C16-S/P SLX24C08/16/P Q67100-H3524 Q67100-H3521 Q67100-H3523 Q67100-H3520 Q67100-H3522 Q67100-H3519 Q67100-H3516 Q67100-H3511 Q67100-H3510 Q67100-H3515 Q67100-H3514 Q67100-H3509 Siemens
Siemens AG
Description : 8/16 KBIT (1024/2048 × 8 bit) SERIAL CMOS-EEPROM WITH I2C Synchronous 2-Wire BUS and Page PROTECTION Mode™

Features
• Data EEPROM internally organized as 1024/2048 bytes and 64/128 pages × 16 bytes
• Page PROTECTION mode, flexible page-by-page hardware WRITE PROTECTION
    – Additional PROTECTION EEPROM of 64/128 bits, 1 bit per data page
    – PROTECTION setting for each data page by writing its PROTECTION bit
    – PROTECTION management WITHout switching WP pin
• Low power CMOS
• VCC = 2.7 to 5.5 V operation
• Two wire SERIAL interface BUS, I2C-BUS compatible
• Filtered inputs for noise suppression WITH Schmitt trigger
• Clock frequency up to 400 kHz
• High programming flexibility
    – Internal programming voltage
    – Self timed programming cycle including erase
    – Byte-WRITE and page-WRITE programming, between 1 and 16 bytes
    – Typical programming time 5 ms for up to 16 bytes
• High reliability
    – Endurance 106 cycles1)
    – Data retention 40 years1)
    – ESD PROTECTION 4000 V on all pins
• 8 pin DIP/DSO packages
• Available for extended temperature ranges
    – Industrial: − 40 °C to + 85 °C
    – Automotive: − 40°C to + 125 °C

View
Part Name(s) : PCA9500 PCA9500BS PCA9500D PCA9500PW NXP
NXP Semiconductors.
Description : 8-bit I2C-BUS and SMBUS I/O port WITH 2-KBIT EEPROM

General description
The PCA9500 is an 8-bit I/O expander WITH an on-board 2-KBIT EEPROM.
The I/O expander's eight quasi-bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master WRITEs to the I/O configuration bits in the same way as for the PCF8574. The data for each input or output is kept in the corresponding Input or Output register. The system master can read all registers.
The EEPROM can be used to store error codes or board manufacturing data for read-back by application software for diagnostic purposes and is included in the I/O expander package.

Features
8 general purpose input/output expander/collector
Drop-in replacement for PCF8574 WITH integrated 2-KBIT EEPROM
Internal 256×8 EEPROM
Self timed WRITE cycle
4 byte page WRITE operation
I2C-BUS and SMBUS interface logic
Internal power-on reset
Noise filter on SCL/SDA inputs
3 address pins allowing up to 8 devices on the I2C-BUS/SMBUS
No glitch on power-up
Supports hot insertion
Power-up WITH all channels configured as inputs
Low standby current
Operating power supply voltage range of 2.5 V to 3.6 V

View
Part Name(s) : M24164 M24164-BN M24164-BN1 M24164-BN1T M24164-MN M24164-MN1 M24164-MN1T M24164-W M24164-WBN M24164-WBN1 M24164-WBN1T M24164-WMN M24164-WMN1 M24164-WMN1T M24164BN M24164MN M24164WBN M24164WMN ST-Microelectronics
STMicroelectronics
Description : 16 KBIT SERIAL I²C BUS EEPROM WITH 1 Inverting and 2 Non-Inverting Chip Enable Lines

SUMMARY DESCRIPTION
The M24164 is a 16 KBIT (2048 x 8) electrically erasable programmable memory (EEPROM) accessed by an I2C-compatible BUS. following the BUS master’s 8-bit transmission. When data is read by the BUS master, the BUS master acknowledges the receipt of the data byte in the same way. Data transfers are terminated by a Stop condition after an Ack for WRITE, and after a NoAck for Read.

FEATURES SUMMARY
■ Two Wire I2C SERIAL Interface
   Supports 400 kHz Protocol
■ Single Supply Voltage:
   – 4.5V to 5.5V for M24164
   – 2.5V to 5.5V for M24164-W
WRITE Control Input
■ BYTE and PAGE WRITE (up to 16 Bytes)
■ RANDOM and SEQUENTIAL READ Modes
■ Self-Timed Programming Cycle
■ Automatic Address Incrementing
■ Enhanced ESD/Latch-Up Behavior
■ More than 1 Million Erase/WRITE Cycles
■ More than 40 Year Data Retention

 

View
Part Name(s) : M34C02-R M34C02-RMB6 M34C02-RMB6T M34C02-RDW6 M34C02-RDW6T STMICROELECTRONICS
STMicroelectronics
Description : 2 KBIT SERIAL I²C BUS EEPROM for DIMM SERIAL presence detect

Description
The M34C02-R is a 2 KBIT SERIAL EEPROM memories able to lock permanently the data in its first half (from location 00h to 7Fh). This facility has been designed specifically for use in DRAM DIMMs (dual interline memory modules) WITH SERIAL presence detect. All the information concerning the DRAM module configuration (such as its access speed, its size, its organization) can be kept WRITE protected in the first half of the memory.

Features
■ Software data PROTECTION for lower 128 bytes
■ Two-wire I2C SERIAL interface
■ 400 kHz transfer rates
■ Single supply voltage:
    – 1.8 V to 5.5 V
■ Byte and Page WRITE (up to 16 bytes)
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up PROTECTION
■ More than 1 million WRITE cycles
■ More than 40 year data retention
■ Packages
    – ECOPACK® (RoHS compliant)

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]