datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 1.5SMCJ19 1.5SMCJ19A 1.5SMCJ19C 1.5SMCJ19CA PanJit
PANJIT INTERNATIONAL
Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 WATTS View

STAND-OFF VOLTAGE 5.0 to 220 Volts

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory Flammability
   Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives

Part Name(s) : 1N5907_03 1N5908_03 1N5907TR_03 1N5908TR_03 Microsemi
Microsemi Corporation
Description : 1500 WATT LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR View

DESCRIPTION
This pair of unidirectional low VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against TRANSIENTs from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when low VOLTAGE is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

FEATURES
• Unidirectional TVS series for thru-hole MOUNTing
• Suppresses TRANSIENTs up to 1500 WATTS @ 10/1000 µs (Figure 1)
   in less than 100 pico seconds
• Low working VOLTAGE (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic
   “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MIL
   PRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g.
   JANTXV1N5907
SURFACE MOUNT equivalent packages also available as SMCJ5.0
   or SMCG5.0 in separate data sheet (consult factory for other
   SURFACE MOUNT options)

APPLICATIONS / BENEFITS  
• Protection from switching TRANSIENTs and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other
   integrated circuits requiring 5.0 V or lower power
   supplies
• Protection from ESD and EFT per IEC 61000-4-2 and
   IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with
   42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in
   Microsemi MicroNote 050

Part Name(s) : P6SMB120CAC P6SMB120CC TSC
TSC Corporation
Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE Range 6.8 to 200 Volts View

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features
For SURFACE MOUNTed application in order to optimize board space
Low profile package 
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to BV min.
Typical IRless than 1μA above 10V
High temperature soldering guaranteed: 250OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0
600 WATTS peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle

Mechanical Data
Case: Molded plastic 
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA STD RS-481)
Weight: 0.093gram

Part Name(s) : 1N5907 1N5907TR 1N5908 1N5908TR JAN1N5907 JAN1N5908 JANTX1N5907 JANTX1N5908 JANTXV1N5907 JANTXV1N5908 Microsemi
Microsemi Corporation
Description : 1500 WATT LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR View

DESCRIPTION
This pair of unidirectional low VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against TRANSIENTs from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when low VOLTAGE is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. Both hermetic seal and molded types are available.

FEATURES
• Unidirectional TVS series for thru-hole MOUNTing
• Suppresses TRANSIENTs up to 1500 WATTS @ 10/1000 µs (Figure 1) in less than 100 pico seconds
• Low working VOLTAGE (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MILPRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N5907
SURFACE MOUNT equivalent packages also available as SMCJ5.0 or SMCG5.0 in separate data sheet (consult factory for other SURFACE MOUNT options)

APPLICATIONS / BENEFITS
• Protection from switching TRANSIENTs and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other integrated circuits requiring 5.0 V or lower power supplies
• Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in Microsemi MicroNote 050


Part Name(s) : SM8A27 General
General Semiconductor
Description : SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR View

SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Zener VOLTAGE -27.0 Volts  Peak Pulse Current - 130.0 Amps

FEATURES
 Ideally suited for load dump protection
 Plastic package has Underwriters Laboratory
   Flammability Classification 94V-0
 High temperature stability due to unique oxide passivation
 Exclusive patented PAR™ oxide passivated chip construction
 Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation
 Low leakage current at TJ=175°C
 Low forward VOLTAGE drop
 High temperature soldering guaranteed: 260°C for 10 seconds at terminals

Part Name(s) : P6SMB100A P6SMB10A P6SMB110A P6SMB11A P6SMB120A P6SMB12A P6SMB130A P6SMB13A P6SMB150A P6SMB15A P6SMB160A P6SMB16A P6SMB170A P6SMB180A P6SMB18A P6SMB200A P6SMB20A P6SMB220A P6SMB22A P6SMB24A P6SMB250A P6SMB27A P6SMB300A P6SMB30A P6SMB33A EIC
Electronics Industry
Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VBR: 6.8 - 440 Volts PPK: 600 WATTS View

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES :
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.)
* Typical IRless then 1μA above 10V
* Pb / RoHS Free

DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use CA Suffix Electrical characteristics apply in both directions

Part Name(s) : SMAJ180A SMAJ180CA SMAJ200A SMAJ200CA SMAJ220A SMAJ220CA SMAJ250A SMAJ250CA SMAJ300A SMAJ300CA SMAJ350A SMAJ350CA SMAJ400A SMAJ400CA SMAJ440A SMAJ440CA MDE-Semiconductor
MDE Semiconductor
Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR View

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 440 Volts 400 Watt Peak Pulse Power

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
  Flammability Classification 94 V-O

Part Name(s) : BZW06 BZW06-13 BZW06-15 BZW06-19 BZW06-20 BZW06-23 BZW06-26 BZW06-28 BZW06-31 BZW06-33 BZW06-37 BZW06-40 BZW06-48 BZW06-58 BZW06-70 BZW06-85 BZW06-102 BZW06-128 BZW06-154 BZW06-171 BZW06-188 BZW06-213 BZW06-256 BZW06-273 BZW06-299 NJSEMI
New Jersey Semiconductor
Description : 600 WATTS TRANSIENT VOLTAGE SUPPRESSOR Diodes View

600 WATTS TRANSIENT VOLTAGE SUPPRESSOR Diodes

Part Name(s) : SMDJ5.0 SMDJ6.0 SMDJ6.5 SMDJ7.0 SMDJ7.5 SMDJ8.0 SMDJ8.5 SMDJ9.0 MDE-Semiconductor
MDE Semiconductor
Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR View

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts 3000 Watt Peak Pulse Power

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory Flammability Classification 94 V-O

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]