datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : AD9609 AD9609-20EBZ AD9609-40EBZ AD9609-65EBZ AD9609-80EBZ AD9609BCPZ-20 AD9609BCPZ-40 AD9609BCPZ-65 AD9609BCPZ-80 AD9609BCPZRL7-20 AD9609BCPZRL7-40 AD9609BCPZRL7-65 AD9609BCPZRL7-80 ADI
Analog Devices
Description : 10-BIT, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V ANALOG-TO-DIGITAL CONVERTER View

GENERAL DESCRIPTION
The AD9609 is a monolithic, single channel 1.8 V supply, 10-BIT, 20 MSPS/40 MSPS/65 MSPS/80 MSPS ANALOG-TO-DIGITAL CONVERTER (ADC). It features a high performance sample-and hold circuit and on-chip voltage reference.

FEATURES
1.8 V analog supply operation
1.8 V to 3.3 V output supply
SNR
  61.5 dBFS at 9.7 MHz input
  61.0 dBFS at 200 MHz input
SFDR
  75 dBc at 9.7 MHz input
  73 dBc at 200 MHz input
Low power
  45 mW at 20 MSPS
  76 mW at 80 MSPS
Differential input with 700 MHz bandwidth
On-chip voltage reference and sample-and-hold circuit
2 V p-p differential analog input
DNL = ±0.10 LSB
Serial port control options
  Offset binary, gray code, or twos complement data format
  Optional clock duty cycle stabilizer
  Integer 1-to-8 input clock divider
  Built-in selectable digital test pattern generation
  Energy-saving power-down modes
  Data clock out with programmable clock and data alignment

APPLICATIONS
Communications
Diversity radio systems
Multimode digital receivers
  GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
Smart antenna systems
Battery-powered instruments
Handheld scope meters
Portable medical imaging
Ultrasound
Radar/LIDAR
PET/SPECT imaging

Part Name(s) : AD9237 AD9237BCP-20 AD9237BCP-40 AD9237BCP-65 AD9237BCPZ-40 AD9237BCPZRL7-40 AD9237 AD9237BCP-20 AD9237BCP-40 AD9237BCP-65 AD9237BCPZ-20 AD9237BCPZRL7-20 AD9237BCPZ-40 AD9237BCPZRL7-40 AD9237BCPZ-65 AD9237BCPZRL7-65 AD9237BCP-20EB AD9237BCP-40EB AD9237BCP-65EB ADI
Analog Devices
Description : 12-Bit, 20 MSPS/40 MSPS/65 MSPS 3 V Low Power A/D CONVERTER View

GENERAL DESCRIPTION
The AD9237 is a family of monolithic, single 3 V supply, 12-bit, 20 MSPS/40 MSPS/65 MSPS ANALOG-TO-DIGITAL CONVERTERs (ADC). This family features a high performance sample-and-hold amplifier (SHA) and voltage reference. The AD9237 uses a multistage differential pipelined architecture with output error correction logic to provide 12-bit accuracy at 20 MSPS/ 40 MSPS/65 MSPS data rates and guarantees no missing codes over the full operating temperature range.

FEATURES
    Ultralow power 85 mW at 20 MSPS 135 mW at 40 MSPS 190 mW at 65 MSPS
    SNR = 66 dBc to Nyquist at 65 MSPS
    SFDR = 80 dBc to Nyquist at 65 MSPS
    DNL = ±0.7 LSB
    Differential input with 500 MHz bandwidth
    Flexible analog input: 1 V p-p to 4 V p-p range
    Offset binary, twos complement, or gray code data formats
    Output enable pin
    2-step power-down
    Full power-down and sleep mode
    Clock duty cycle stabilizer

APPLICATIONS
    Ultrasound and medical imaging
    Battery-powered instruments
    Hand-held scope meters
    Low cost digital oscilloscopes
    Low power digital still cameras and copiers
    Low power communications

Part Name(s) : AD9204 AD9204-20 AD9204-40 AD9204-65 AD9204-80 AD9204BCPZ-80 AD9204BCPZRL7-80 AD9204BCPZ-65 AD9204BCPZRL7-65 AD9204BCPZ-40 AD9204BCPZRL7-40 AD9204BCPZ-20 AD9204BCPZRL7-20 AD9204-80EBZ AD9204-65EBZ AD9204-40EBZ AD9204-20EBZ AD9204 AD9204-20EBZ AD9204-20EBZ1 AD9204-40EBZ AD9204-40EBZ1 AD9204-65EBZ AD9204-65EBZ1 AD9204-80EBZ ADI
Analog Devices
Description : 10-BIT, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V Dual ANALOG-TO-DIGITAL CONVERTER View

GENERAL DESCRIPTION
The AD9204 is a monolithic, dual-channel, 1.8 V supply, 10-BIT, 20 MSPS/40 MSPS/65 MSPS/80 MSPS ANALOG-TO-DIGITAL CONVERTER (ADC). It features a high performance sample-and-hold circuit and on-chip voltage reference.

FEATURES
    1.8 V analog supply operation
    1.8 V to 3.3 V output supply
    SNR
        61.3 dBFS at 9.7 MHz input
        61.0 dBFS at 200 MHz input
    SFDR
        75 dBc at 9.7 MHz input
        73 dBc at 200 MHz input
    Low power
        30 mW per channel at 20 MSPS
        63 mW per channel at 80 MSPS
    Differential input with 700 MHz bandwidth
    On-chip voltage reference and sample-and-hold circuit
    DNL = ±0.11 LSB
    Serial port control options
        Scalable analog input: 1 V p-p to 2 V p-p differential
        Offset binary, gray code, or twos complement data format
        Optional clock duty cycle stabilizer
        Integer 1-to-8 input clock divider
        Built-in selectable digital test pattern generation
        Energy-saving power-down modes
        Data clock out with programmable clock and data alignment

APPLICATIONS
    Communications
    Diversity radio systems
    Multimode digital receivers GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
    I/Q demodulation systems
    Smart antenna systems
    Battery-powered instruments
    Handheld scope meters
    Ultrasound
    Radar/LIDAR
    PET/SPECT imaging

Part Name(s) : AD9251 AD9251-20 AD9251-40 AD9251-65 AD9251-80 AD9251BCPZ-80 AD9251BCPZRL7-80 AD9251BCPZ-65 AD9251BCPZRL7-65 AD9251BCPZ-40 AD9251BCPZRL7-40 AD9251BCPZ-20 AD9251BCPZRL7-20 AD9251-80EBZ AD9251-65EBZ AD9251-40EBZ AD9251-20EBZ AD9251 AD9251-20 AD9251-40 AD9251-65 AD9251-80 AD9251BCPZ-80 AD9251BCPZRL7-80 AD9251BCPZ-65 ADI
Analog Devices
Description : 14-Bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V Dual ANALOG-TO-DIGITAL CONVERTER View

GENERAL DESCRIPTION
The AD9251 is a monolithic, dual-channel, 1.8 V supply, 14-bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS ANALOG-TO-DIGITAL CONVERTER (ADC). It features a high performance sample-and-hold circuit and on-chip voltage reference.

FEATURES
    1.8 V analog supply operation
    1.8 V to 3.3 V output supply
    SNR
        74.3 dBFS at 9.7 MHz input
        71.5 dBFS at 200 MHz input
    SFDR
        93 dBc at 9.7 MHz input
        80 dBc at 200 MHz input
    Low power
        33 mW per channel at 20 MSPS
        73 mW per channel at 80 MSPS
    Differential input with 700 MHz bandwidth
    On-chip voltage reference and sample-and-hold circuit
    DNL = ±0.45 LSB
    Serial port control options
        Scalable analog input: 1 V p-p to 2 V p-p differential
        Offset binary, gray code, or twos complement data format
        Optional clock duty cycle stabilizer
        Integer 1-to-8 input clock divider
        Data output multiplex option
        Built-in selectable digital test pattern generation
        Energy-saving power-down modes
        Data clock out with programmable clock and data alignment

APPLICATIONS
    Communications
    Diversity radio systems
    Multimode digital receivers GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
    I/Q demodulation systems
    Smart antenna systems
    Battery-powered instruments
    Hand held scope meters
    Portable medical imaging
    Ultrasound
    Radar/LIDAR


Part Name(s) : AD9650 AD9650-105EBZ AD9650-25EBZ AD9650-65EBZ AD9650-80EBZ AD9650BCPZ-105 AD9650BCPZ-25 AD9650BCPZ-65 AD9650BCPZ-80 AD9650BCPZRL7-105 AD9650BCPZRL7-25 AD9650BCPZRL7-65 AD9650BCPZRL7-80 ADI
Analog Devices
Description : 16-Bit, 25 MSPS/65 MSPS/80 MSPS/105 MSPS, 1.8 V Dual ANALOG-TO-DIGITAL CONVERTER (ADC) View

GENERAL DESCRIPTION
The AD9650 is a dual, 16-bit, 25 MSPS/65 MSPS/80 MSPS/105 MSPS ANALOG-TO-DIGITAL CONVERTER (ADC) designed for digitizing high frequency, wide dynamic range signals with input frequencies of up to 300 MHz. The dual ADC core features a multistage, differential pipelined architecture with integrated output error correction logic. Each ADC features wide bandwidth, differential sample-and-hold analog input amplifiers, and shared integrated voltage reference, which eases design considerations. A duty cycle stabilizer is provided to compensate for variations in the ADC clock duty cycle, allowing the CONVERTERs to maintain excellent performance.

FEATURES
1.8 V analog supply operation
1.8 V CMOS or LVDS output supply
SNR
  82 dBFS at 30 MHz input and 105 MSPS data rate
  83 dBFS at 9.7 MHz input and 25 MSPS data rate
SFDR
  90 dBc at 30 MHz input and 105 MSPS data rate
  95 dBc at 9.7 MHz input and 25 MSPS data rate
Low power
  328 mW per channel at 105 MSPS
  119 mW per channel at 25 MSPS
Integer 1-to-8 input clock divider
IF sampling frequencies to 300 MHz
Analog input range of 2.7 V p-p
Optional on-chip dither
Integrated ADC sample-and-hold inputs
Differential analog inputs with 500 MHz bandwidth
ADC clock duty cycle stabilizer

APPLICATIONS
Industrial instrumentation
X-Ray, MRI, and ultrasound equipment
High speed pulse acquisition
Chemical and spectrum analysis
Direct conversion receivers
Multimode digital receivers
Smart antenna systems
General-purpose software radios

Part Name(s) : ADC08L060 ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB ADC08L060CIMT Texas-Instruments
Texas Instruments
Description : 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold View

DESCRIPTION
The ADC08L060 is a low-power, 8-bit, monolithic ANALOG-TO-DIGITAL CONVERTER with an on-chip track-and- hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

Part Name(s) : ADC08L060 ADC08L060CIMT ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB TI
Texas Instruments
Description : 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold View

DESCRIPTION
The ADC08L060 is a low-power, 8-bit, monolithic ANALOG-TO-DIGITAL CONVERTER with an on-chip track-and- hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

Part Name(s) : AD9057 AD9057-40 AD9057-60 AD9057-80 AD9057-PCB AD9057/PCB AD9057BRS-40 AD9057BRS-60 AD9057BRS-80 AD9057BRS-RL40 AD9057BRSZ-40 AD9057BRSZ-60 AD9057BRSZ-80 AD9057BRSZ-RL40 AD9057BRSZ-RL60 AD9057PCB ADI
Analog Devices
Description : 8-Bit 40 MSPS/60 MSPS/80 MSPS A/D CONVERTER View

PRODUCT DESCRIPTION
The AD9057 is an 8-bit monolithic ANALOG-TO-DIGITAL CONVERTER optimized for low cost, low power, small size, and ease of use. With 40 MSPS, 60 MSPS, or 80 MSPS encode rate capability and full-power analog bandwidth of 120 MHz, the component is ideal for applications requiring excellent dynamic performance. To minimize system cost and power dissipation, the AD9057 includes an internal 2.5 V reference and a track-and-hold (T/H) circuit. The user must provide only a 5 V power supply and an encode clock. No external reference or driver components are required for many applications.

FEATURES
8-Bit, Low Power ADC: 200 mW Typical
120 MHz Analog Bandwidth
On-Chip 2.5 V Reference and Track-and-Hold
1 V p-p Analog Input Range
Single 5 V Supply Operation
5 V or 3 V Logic Interface
Power-Down Mode: <10 mW
3 Performance Grades (40 MSPS, 60 MSPS, 80 MSPS)

APPLICATIONS
Digital Communications (QAM Demodulators)
RGB and YC/Composite Video Processing
Digital Data Storage Read Channels
Medical Imaging
Digital Instrumentation

Part Name(s) : AD9050 AD9050BR AD9050BRS AD9050BRS-60 ADI
Analog Devices
Description : 10-BIT, 40 MSPS/60 MSPS A/D CONVERTER View

PRODUCT DESCRIPTION
The AD9050 is a complete 10-BIT monolithic sampling ANALOG-TO-DIGITAL CONVERTER (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only +5 V and an encode clock to achieve 40 MSPS or 60 MSPS sample rates with 10-BIT resolution.
The encode clock is TTL compatible and the digital outputs are CMOS; both can operate with 5 V/3 V logic, selected by the user. The two-step architecture used in the AD9050 is optimized to provide the best dynamic performance available while maintaining low power consumption.
A 2.5 V reference is included onboard, or the user can provide an external reference voltage for gain control or matching of multiple devices. Fabricated on an advanced BiCMOS process, the AD9050 is packaged in space saving surface mount packages (SOIC, SSOP) and is specified over the industrial (–40°C to +85°C) temperature range. The 60 MSPS version (AD9050BRS-60) is only available in the SSOP package.

FEATURES
  Low Power: 315 mW @ 40 MSPS, 345 mW @ 60 MSPS
  On-Chip T/H, Reference
  Single +5 V Power Supply Operation
  Selectable 5 V or 3 V Logic I/O
  SNR: 53 dB Minimum at 10 MHz w/40 MSPS

APPLICATIONS
  Medical Imaging
  Instrumentation
  Digital Communications
  Professional Video

 

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]