datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Fairchild
Fairchild Semiconductor
Description : 10-Bit D-Type Flip-Flop with 3-STATE Outputs

General Description
The AC/ACT821 is a 10-Bit D-type Flip-Flop with 3-STATE Outputs arranged in a broadside pinout.

Features
■ 3-STATE Outputs for bus interfacing
■ Noninverting Outputs
Outputs source/sink 24 mA
■ TTL compatible input

Description : 10-Bit D-Type Flip-Flop with 3-STATE Outputs

General Description
The AC/ACT821 is a 10-Bit D-type Flip-Flop with 3-STATE Outputs arranged in a broadside pinout.

Features
■ 3-STATE Outputs for bus interfacing
■ Noninverting Outputs
Outputs source/sink 24 mA
■ TTL compatible inputs

ST-Microelectronics
STMicroelectronics
Description : 16-BIT D-TYPE Flip-Flop with 3-STATE Outputs (NON INVERTED)

DESCRIPTION
The 74ACT16374 is an advanced high-speed CMOS 16-BIT D-TYPE Flip-Flop (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS tecnology.
This 16 bit D-Type Flip-Flop is controlled by two clock inputs (CK) and two output enable inputs (OE). The device can be used as two 8-bit Flip-Flops or one 16-bit Flip-Flop.
On the positive transition of the clock, the Q Outputs will be set to the logic state that were setup at the D inputs.
While the (OE) input is low, the Outputs will be in a normal logic state (high or low logic level); while OE is high, the Outputs will be in a high impedance state.
The output control does not affect the internal operation of Flip-Flops; that is, the old data can be retained or the new data can be entered even while the Outputs are off.
All inputs and Outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

■ HIGH SPEED:
   fMAX = 120MHz (TYP.) at VCC = 5V
■ LOW POWER DISSIPATION:
   ICC = 8µA(MAX.) at TA=25°C
■ COMPATIBLE with TTL Outputs
   VIH = 2V (MIN.), VIL = 0.8V (MAX.)
■ 50Ω TRANSMISSION LINE DRIVING CAPABILITY
■ SYMMETRICAL OUTPUT IMPEDANCE:
   |IOH| = IOL = 24mA (MIN)
■ OPERATING VOLTAGE RANGE:
   VCC (OPR) = 4.5V to 5.5V
■ IMPROVED LATCH-UP IMMUNITY

Part Name(s) : 74AC16374 74AC16374TTR
ST-Microelectronics
STMicroelectronics
Description : 16-BIT D-TYPE Flip-Flop with 3-STATE Outputs (NON INVERTED)

DESCRIPTION
The 74AC16374 is an advanced high-speed CMOS 16-BIT D-TYPE Flip-Flop (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS tecnology.
This 16 bit D-Type Flip-Flop is controlled by two clock inputs (CK) and two output enable inputs (OE). The device can be used as two 8-bit Flip-Flops or one 16-bit Flip-Flop.
On the positive transition of the clock, the Q Outputs will be set to the logic state that were setup at the D inputs.
While the (OE) input is low, the Outputs will be in a normal logic state (high or low logic level); while OE is high, the Outputs will be in a high impedance state.
The output control does not affect the internal operation of Flip-Flops; that is, the old data can be retained or the new data can be entered even while the Outputs are off.
All inputs and Outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

■ HIGH SPEED:
   fMAX = 120MHz (TYP.) at VCC = 5V
■ LOW POWER DISSIPATION:
   ICC = 8µA(MAX.) at TA=25°C
■ HIGH NOISE IMMUNITY:
   VNIH = VNIL = 28 % VCC (MIN.)
■ 50Ω TRASMISSION LINE DRIVING CAPABILITY
■ SYMMETRICAL OUTPUT IMPEDANCE:
   |IOH| = IOL = 24mA (MIN)
■ OPERATING VOLTAGE RANGE:
   VCC (OPR) = 2V to 6V
■ IMPROVED LATCH-UP IMMUNITY

Part Name(s) : DM74LS534 DM74LS534N
Fairchild
Fairchild Semiconductor
Description : Octal D-Type Flip-Flop with 3-STATE Outputs

General Description
The DM74LS534 is a high speed, low power octal D-type Flip-Flop featuring separate D-type inputs for each Flip-Flop and 3-STATE Outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE) is common to all Flip-Flops. The DM74LS534 is the same as the DM74LS374 except that the Outputs are inverted.

 

Description : Octal D-Type Flip-Flop with 3-State Outputs

Octal D-Type Flip-Flop with 3-State Outputs

The MC74AC534/74ACT534 is a high-speed, low-power octal D-type Flip-Flop featuring separate D-type inputs for each Flip-Flop and 3-state Outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all flip flops. The ′AC/ACT534 is the same as the ′AC/ACT374 except that the Outputs are inverted.

• Edge-Triggered D-Type Inputs
• Buffered Positive Edge-Triggered Clock
• 3-State Outputs for Bus Oriented Applications

Motorola
Motorola => Freescale
Description : OCTAL D-TYPE Flip-Flop with 3-STATE Outputs

OCTAL D-TYPE Flip-Flop with 3-STATE Outputs

The MC74F574 is a high-speed, low-power octal D-type Flip-Flop featuring separate D-type inputs for each Flip-Flop and 3-state Outputs for bus oriented applications. A buffered clock (CP) and Output Enable (OE) are common to all Flip-Flops.
This device is functionally identical to the F374 except for the pinouts.

• Broadside Pinout Version of F374
• Edge-Triggered D-Type Inputs
• Buffered Positive Edge-Triggered Clock
• 3-State Outputs for Bus Oriented Applications
• ESD Protection > 4000 Volts

Description : Octal D-Type Flip-Flop with 3-State Outputs

Octal D-Type Flip-Flop with 3-State Outputs

The MC74AC374/74ACT374 is a high-speed, low-power octal D-type Flip-Flop featuring separate D-type inputs for each Flip-Flop and 3-state Outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all Flip-Flops.

• Buffered Positive Edge-Triggered Clock
• 3-State Outputs for Bus-Oriented Applications
Outputs Source/Sink 24 mA
• See MC74AC273 for Reset Version
• See MC74AC377 for Clock Enable Version
• See MC74AC373 for Transparent Latch Version
• See MC74AC574 for Broadside Pinout Version
• See MC74AC564 for Broadside Pinout Version with Inverted Outputs
• ′ACT374 Has TTL Compatible Inputs

Description : Octal D-Type Flip-Flop with 3-State Outputs

Octal D-Type Flip-Flop with 3-State Outputs

The MC74AC374/74ACT374 is a high-speed, low-power octal D-type Flip-Flop featuring separate D-type inputs for each Flip-Flop and 3-state Outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all Flip-Flops.

• Buffered Positive Edge-Triggered Clock
• 3-State Outputs for Bus-Oriented Applications
Outputs Source/Sink 24 mA
• See MC74AC273 for Reset Version
• See MC74AC377 for Clock Enable Version
• See MC74AC373 for Transparent Latch Version
• See MC74AC574 for Broadside Pinout Version
• See MC74AC564 for Broadside Pinout Version with Inverted Outputs
• ′ACT374 Has TTL Compatible Inputs

PERICOM
Pericom Semiconductor Corporation
Description : 16-Bit D-Type Flip-Flop with 3-State Outputs

Product Description
The PI74ALVTC16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device can be used as two 8-bit Flip-Flops or one 16-bit Flip-Flop. On the positive transition of the clock (CLK) input, the Q Outputs of the Flip-Flop take on the logic levels set up at the data (D) inputs.

Product Features
• The PI74ALVTC Family is designed for low voltage operation, VDD = 1.8V to 3.6V
• Supports Live Insertion
• 3.6V I/O Tolerant Inputs and Outputs
• Bus Hold
• High Drive, –32/64mA @ 3.3V
• Uses patented Noise Reduction Circuitry
• Power-Off high impedance inputs and Outputs
• Industrial operation at –40°C to +85°C
• Packaging (Pb-free & Green available):
    – 48-pin 240 mil wide plastic TSSOP (A)

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]