datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : AD9060 AD9060/PCB AD9060JE AD9060JZ AD9060KE AD9060KZ AD9060SE AD9060SZ AD9060TE AD9060TZ ADI
Analog Devices
Description : 10-BIT 75 MSPS A/D CONVERTER

GENERAL DESCRIPTION
The AD9060 A/D CONVERTER is a 10-BIT monolithic CONVERTER capable of word rates of 75 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash CONVERTERs reduces input capacitance and improves linearity.
Inputs and outputs are ECL-compatible, which makes the AD9060 the recommended choice for systems with conversion rates >30 MSPS to minimize system noise. An overflow bit is provided to indicate analog input signals greater than +VSENSE.
Voltage sense lines are provided to ensure accurate driving of the ±VREF voltages applied to the units. Quarter-point taps on the resistor ladder help optimize the integral linearity of the unit.

FEATURES
  Monolithic 10-BIT/75 MSPS CONVERTER
  ECL Outputs
  Bipolar (61.75 V) Analog Input
  57 dB SNR @ 2.3 MHz Input
  Low (45 pF) Input Capacitance
  MIL-STD-883 Compliant Versions Available

APPLICATIONS
  Digital Oscilloscopes
  Medical Imaging
  Professional Video
  Radar Warning/Guidance Systems
  Infrared Systems

 

View
Part Name(s) : SPT7835 SPT7835SCT SPT7835SIS Fairchild
Fairchild Semiconductor
Description : 10-BIT, 5 MSPS, 75 mW A/D CONVERTER

GENERAL DESCRIPTION
The SPT7835 is a 10-BIT monolithic, low-cost, ultralow power analog-to-digital CONVERTER capable of minimum word rates of 5 MSPS. The on-chip track-and-hold function assures very good dynamic performance without the need for external components. The input drive requirements are minimized due to the SPT7835’s low input capacitance of only 5 pF.
Power dissipation is extremely low at only 75 mW typical at 5 MSPS with a power supply of +5.0 V. The digital outputs are +3 V or +5 V, and are user selectable. The SPT7835 is pin-compatible with an entire family of 10-BIT, CMOS CONVERTERs (SPT7835/40/50/55/60/61), which simplifies upgrades. The SPT7835 has incorporated proprietary circuit design* and CMOS processing technologies to achieve its advanced performance. Inputs and outputs are TTL/CMOS-compatible to interface with TTL/CMOS logic systems. Output data format is straight binary.

FEATURES
• Monolithic 5 MSPS CONVERTER
75 mW power dissipation
• On-chip track-and-hold
• Single +5 V power supply
• TTL/CMOS outputs
• 5 pF input capacitance
• Low cost
• Tri-state output buffers
• High ESD protection: 3,500 V minimum
• Selectable +3 V or +5 V logic I/O

APPLICATIONS
• All high-speed applications where low power dissipation is required
• Video imaging
• Medical imaging
• IR imaging
• Scanners
• Digital communications

 

View
Part Name(s) : SPT7835 SPT7835SCT SPT7835SIS CADEKA
Cadeka Microcircuits LLC.
Description : 10-BIT, 5 MSPS, 75 mW A/D CONVERTER

GENERAL DESCRIPTION
The SPT7835 is a 10-BIT monolithic, low-cost, ultralow power analog-to-digital CONVERTER capable of minimum word rates of 5 MSPS. The on-chip track-and-hold function assures very good dynamic performance without the need for external components. The input drive requirements are minimized due to the SPT7835’s low input capacitance of only 5 pF.
Power dissipation is extremely low at only 75 mW typical at 5 MSPS with a power supply of +5.0 V. The digital outputs are +3 V or +5 V, and are user selectable. The SPT7835 is pin-compatible with an entire family of 10-BIT, CMOS CONVERTERs (SPT7835/40/50/55/60/61), which simplifies upgrades. The SPT7835 has incorporated proprietary circuit design* and CMOS processing technologies to achieve its advanced performance. Inputs and outputs are TTL/CMOS-compatible to interface with TTL/CMOS logic systems. Output data format is straight binary.

FEATURES
• Monolithic 5 MSPS CONVERTER
75 mW power dissipation
• On-chip track-and-hold
• Single +5 V power supply
• TTL/CMOS outputs
• 5 pF input capacitance
• Low cost
• Tri-state output buffers
• High ESD protection: 3,500 V minimum
• Selectable +3 V or +5 V logic I/O

APPLICATIONS
• All high-speed applications where low power dissipation is required
• Video imaging
• Medical imaging
• IR imaging
• Scanners
• Digital communications

 

View
Part Name(s) : SPT7835 SPT7835SCT SPT7835SIS SPT
Signal Processing Technologies
Description : 10-BIT, 5 MSPS, 75 mW A/D CONVERTER

GENERAL DESCRIPTION
The SPT7835 is a 10-BIT monolithic, low-cost, ultralow power analog-to-digital CONVERTER capable of minimum word rates of 5 MSPS. The on-chip track-and-hold function assures very good dynamic performance without the need for external components. The input drive requirements are minimized due to the SPT7835’s low input capacitance of only 5 pF.
Power dissipation is extremely low at only 75 mW typical at 5 MSPS with a power supply of +5.0 V. The digital outputs are +3 V or +5 V, and are user selectable. The SPT7835 is pin-compatible with the entire family of SPT 10-BIT, CMOS CONVERTERs (SPT7835/40/50/55/60/61), which simplifies upgrades. The SPT7835 has incorporated proprietary circuit design* and CMOS processing technologies to achieve its advanced performance. Inputs and outputs are TTL/CMOS-compatible to interface with TTL/CMOS logic systems. Output data format is straight binary.

FEATURES
• Monolithic 5 MSPS CONVERTER
75 mW power dissipation
• On-chip track-and-hold
• Single +5 V power supply
• TTL/CMOS outputs
• 5 pF input capacitance
• Low cost
• Tri-state output buffers
• High ESD protection: 3,500 V minimum
• Selectable +3 V or +5 V logic I/O

APPLICATIONS
• All high-speed applications where low power dissipation is required
• Video imaging
• Medical imaging
• IR imaging
• Scanners
• Digital communications

 

View
Part Name(s) : ADC08L060 ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB ADC08L060CIMT Texas-Instruments
Texas Instruments
Description : 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold

DESCRIPTION
The ADC08L060 is a low-power, 8-bit, monolithic analog-to-digital CONVERTER with an on-chip track-and- hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

View
Part Name(s) : ADC08L060 ADC08L060CIMT ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB TI
Texas Instruments
Description : 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold

DESCRIPTION
The ADC08L060 is a low-power, 8-bit, monolithic analog-to-digital CONVERTER with an on-chip track-and- hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

View
Part Name(s) : AD872A AD872AJD AD872AJE AD872ASD AD872ASE ADI
Analog Devices
Description : Complete 12-Bit 10 MSPS Monolithic A/D CONVERTER

PRODUCT DESCRIPTION
The AD872A is a monolithic 12-bit, 10 MSPS analog-to-digital CONVERTER with an on-chip, high performance track-and-hold amplifier and voltage reference. The AD872A uses a multistage differential pipelined architecture with error correction logic to provide 12-bit accuracy at 10 MSPS data rates and guarantees no missing codes over the full operating temperature range. The AD872A is a redesigned version of the AD872 which has been optimized for lower noise. The AD872A is pin compatible with the AD872, allowing the parts to be used interchangeably as sys
tem requirements change.

FEATURES
Monolithic 12-Bit 10 MSPS A/D CONVERTER
Low Noise: 0.26 LSB RMS Referred-to-Input
No Missing Codes Guaranteed
Differential Nonlinearity Error: 0.5 LSB
Signal-to-Noise and Distortion Ratio: 68 dB
Spurious-Free Dynamic Range: 75 dB
Power Dissipation: 1.03 W
Complete: On-Chip Track-and-Hold Amplifier and Voltage Reference
Twos Complement Binary Output Data
Out-of-Range Indicator
28-Lead Ceramic DIP or 44-Terminal Leadless Chip Carrier Package

View
Part Name(s) : MP8784 MP8784AN MP8784AS Exar
Exar Corporation
Description : CMOS 5 MSPS 10-BIT, High Speed Analog-to-Digital CONVERTER

CMOS 5 MSPS 10-BIT, High Speed Analog-to-Digital CONVERTER

View
Part Name(s) : AD9050 AD9050BR AD9050BRS AD9050BRS-60 ADI
Analog Devices
Description : 10-BIT, 40 MSPS/60 MSPS A/D CONVERTER

PRODUCT DESCRIPTION
The AD9050 is a complete 10-BIT monolithic sampling analog-to-digital CONVERTER (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only +5 V and an encode clock to achieve 40 MSPS or 60 MSPS sample rates with 10-BIT resolution.
The encode clock is TTL compatible and the digital outputs are CMOS; both can operate with 5 V/3 V logic, selected by the user. The two-step architecture used in the AD9050 is optimized to provide the best dynamic performance available while maintaining low power consumption.
A 2.5 V reference is included onboard, or the user can provide an external reference voltage for gain control or matching of multiple devices. Fabricated on an advanced BiCMOS process, the AD9050 is packaged in space saving surface mount packages (SOIC, SSOP) and is specified over the industrial (–40°C to +85°C) temperature range. The 60 MSPS version (AD9050BRS-60) is only available in the SSOP package.

FEATURES
  Low Power: 315 mW @ 40 MSPS, 345 mW @ 60 MSPS
  On-Chip T/H, Reference
  Single +5 V Power Supply Operation
  Selectable 5 V or 3 V Logic I/O
  SNR: 53 dB Minimum at 10 MHz w/40 MSPS

APPLICATIONS
  Medical Imaging
  Instrumentation
  Digital Communications
  Professional Video

 

View
Part Name(s) : XRD64L06 XRD64L06AIP XRD64L06AID Exar
Exar Corporation
Description : CMOS 3V, 6 MSPS, 10-BIT, High Speed Analog-to-Digital CONVERTER

CMOS 3V, 6 MSPS, 10-BIT, High Speed Analog-to-Digital CONVERTER

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]