datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : HFBR-5527 HP
HP => Agilent Technologies
Description : 125 Megabaud FIBER Optic TRANSCEIVER JIS FO7 Connection View

The 125 MBd TRANSCEIVER is a cost-effective FIBER-optic solution for transmission of 125 MBd data up to 100 meters with HCS® FIBER. The data link consists of a 650 nm visible, red LED transmitter and a PIN/preamp receiver. These can be used with low-cost plastic or hard clad silica FIBER.

• Data Transmission at Signal Rates of 1 to 125 MBd over Distances up to 100 Meters
• Compatible with Duplex JIS FO7 and Simplex JIS FO5 Connectors
• Specified for Use with Plastic Optical FIBER (POF), and with Large Core Silica FIBER (HCS®)
• Transmitter and Receiver Application Circuit Schematics Available
• Conductive Plastic Housing Provides Electrical Shield

• Intra-System Links: Boardto-Board, Rack-to-Rack
• High Voltage Isolation
• Telecommunications Switching Systems
• Computer-to-Peripheral Data Links, PC Bus Extension
• Industrial Control Networks
• Proprietary LANs
• Digitized Video
• Medical Instruments
• Immune to Lightning and Voltage Transients

Part Name(s) : SPS-8340BG SPS-8340G Optoway
Optoway Technology
Description : 3.3V / 1550 nm / 4.25 GBPS LC SFP SINGLE-MODE TRANSCEIVER View

The SPS-8340G series SINGLE mode TRANSCEIVER is small form factor pluggable module for BI-DIRECTIONAL serial optical dat a communicat ions such as 4x/2x/ 1x Fibre Channel and 1000BASE Ethernet . It is with t he SFP 20- pin connector to allow hot plug capability . This module is designed for SINGLE mode FIBER and operates at a nominal wave length of 1550 nm. The transmitter secti on  uses  a 1550 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety  Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical  header and a limiting post-amplifier IC.

Up  to  4.25 GBPS BI-DIRECTIONAL Dat a Links
Hot-Pluggable SFP Footprint LC Optical TRANSCEIVER
Small Form-Factor Pl uggable(SFP) MSA compatible
Compliance with Fibre Channel FC-PI 400/ 200/ 100-SM-LC-L
1550 nm DFB LD Transmitter
18 dB Power Budget at Least
AC/AC Coupling according  to MSA
Up to  40 km Transmission
SINGLE +3.3 V Power Supply
RoHS Compliant
0 to 70°C Operating : SPS-8340G
-10  to 85°C Operating : SPS-8340BG
Class  1 Laser International Safety  Standard IEC-60825 Compliant


Part Name(s) : VSC7281 Vitesse
Vitesse Semiconductor
Description : Dual XAUI ? SINGLE XGMII Quad 0.95 GBPS to 3.25 GBPS TRANSCEIVER View

The VSC7281 is a Dual XAUI – SINGLE XGMII TRANSCEIVER tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
► Dual XAUI Serial Bus
► 0.95 GBPS to 3.25 GBPS Quad SerDes/TRANSCEIVER
► XAUI Compliant Retimer and Repeater Modes
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-toChannel Alignment
► Received Data Aligned to Local REFCLK or to Recovered Clock
► TX and RX Rate Matching for FC, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-to-Box Serial Communications
    - Copper, Coax, and FIBER

Leshan Radio Company,Ltd



Part Name(s) : GTL2002D GTL2002DC GTL2002DP GTL2002 Philips
Philips Electronics
Description : 2-bit BI-DIRECTIONAL low voltage translator View

The Gunning TRANSCEIVER Logic — TRANSCEIVER Voltage Clamps (GTL–TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The device allows BI-DIRECTIONAL voltage translations between 1.0 V and 5.0 V without use of a direction pin.

• 2-bit BI-DIRECTIONAL low voltage translator
• Allows voltage level translation between 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V buses which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels
• Provides BI-DIRECTIONAL voltage translation with no direction pin
• Low 6.5 Ω RDSON resistance between input and output pins (Sn/Dn)
• Supports hot insertion
• No power supply required - Will not latch up
• 5 V tolerant inputs
• Low stand-by current
• Flow-through pinout for ease of printed circuit board trace routing
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V per JESD22-C101
• Packages offered: SO8, TSSOP8 (MSOP8), VSSOP8

• Any application that requires BI-DIRECTIONAL or unidirectional voltage level translation from any voltage between 1.0 V and 5.0 V to any voltage between 1.0 V and 5.0 V
• The open drain construction with no direction pin is ideal for BI-DIRECTIONAL low voltage (e.g., 1.0 V, 1.2 V, 1.5 V, or 1.8 V) processor I2C port translation to the normal 3.3 V or 5.0 V I2C-bus signal levels or GTL/GTL+ translation to LVTTL/TTL signal levels.

Part Name(s) : B-13-1250-T-SSC2A B-13-1250-T3-SSC2A B-13-1250C-T-SSC2A B-13-1250C-T-SSCA2A B-13-1250C-T3-SSC2A B-15-1250-T-SSC2A B-15-1250-T3-SSC2A B-15-1250C-T-SSC2A B-15-1250C-T-SSCA2A B-15-1250C-T3-SSC2A ETC

[Source Photonics, Inc.]

• Diplexer SINGLE Mode SINGLE FIBER 1x9 SC Receptacle Connector
• Wavelength Tx 1310 nm/Rx 1530 nm
• IEEE 802.3 Compliant
SINGLE +5V Power Supply [B-13/15-1250(C)-T-SSC2A]
SINGLE +3.3V power Supply [B-13/15-1250(C)-T3-SSC2A]
• PECL/LVPECL Differential Inputs and Output [B-13/15-1250-T(3)-SSC2A]
• TTL/LVTTL Signal Detection Output Optional [B-13/15-1250C-T(3)-SSC2A]
• Wave Solderable and Aqueous Washable
• LED Multisourced 1x9 TRANSCEIVER Interchangeable
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled Laser diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Temperature Range: -40 to 85ºC
• Optical Isolation > 30 dB
• Cross Talk < -33 dB

Part Name(s) : DS36C200 DS36C200M DS36C200 DS36C200M DS36C200MX National-Semiconductor
National ->Texas Instruments
Description : Dual High Speed BI-DIRECTIONAL Differential TRANSCEIVER View

General Description
The DS36C200 is a dual TRANSCEIVER device optimized for high data rate and low power applications. This device provides a SINGLE chip solution for a dual high speed BI-DIRECTIONAL interface. Also, both control pins may be routed together for SINGLE bit control of datastreams. Both control pins are adjacent to each other for ease of routing them together. The DS36C200 is compatible with IEEE 1394 physical layer and may be used as an economical solution with some considerations. Please reference the application information on 1394 for more information. The device is in a 14-lead small outline package. The differential driver outputs provides low EMI with its low output swings typically 210 mV. The receiver offers ±100 mV threshold sensitivity, in addition to common-mode noise protection.

■ Optimized for DSS to DVHS interface link
■ Compatible IEEE 1394 signaling voltage levels
■ Operates above 100 Mbps
■ 14-lead SOIC package
■ Ultra low power dissipation
■ ±100 mV receiver sensitivity
■ Low differential output swing typical 210 mV
■ High impedance during power off

Part Name(s) : TLK2501 TLK2501IRCP TLK2501IRCPG4 TLK2501IRCPR TLK2501IRCPRG4 TI
Texas Instruments
Description : 1.5 TO 2.5 GBPS TRANSCEIVER View

The TLK2501 is a member of the TRANSCEIVER family of multigigabit TRANSCEIVERs used in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2501 supports an effective serial interface speed of 1.5 GBPS to 2.5 GBPS, providing up to 2 GBPS of data bandwidth. The TLK2501 is pin-for-pin compatible with the TLK2500. The TLK2501 is both pin-for-pin compatible with and functionally identical to the TLK1501, a 0.6 to 1.5 GBPS TRANSCEIVER, and the TLK3101, a 2.5 to 3.125 GBPS TRANSCEIVER, providing a wide range of performance solutions with no required board layout changes.

● Hot-Plug Protection
● 1.5 to 2.5 Gigabits Per Second (GBPS) Serializer/Deserializer
● High-Performance 64-Pin VQFP Thermally Enhanced Package (PowerPAD)
● 2.5-V Power Supply for Low Power Operation
● Programmable Voltage Output Swing on Serial Output
● Interfaces to Backplane, Copper Cables, or Optical Converters
● Rated for Industrial Temperature Range
● On-Chip 8-Bit/10-Bit (8B/10B) Encoding/Decoding, Comma Alignment, and Link Synchronization
● On-Chip PLL Provides Clock Synthesis From Low-Speed Reference
● Receiver Differential Input Thresholds 200 mV Minimum
● Typical Power: 360 mW
● Loss of Signal (LOS) Detection
● Ideal for High-Speed Backplane Interconnect and Point-to-Point Data Link

Part Name(s) : TLK2500IRCP TI
Texas Instruments
Description : 1.6 GBPS to 2.5 GBPS TRANSCEIVER View

The TLK2500 multigigabit TRANSCEIVER can be used for ultra-high-speed bidirectional point-to-point data transmissions. The TLK2500 supports an effective serial interface speed of 1.6 GBPS to 2.5 GBPS.
The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 Ω. The transmission media can be printed-circuit board, copper cables, or FIBER-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

● 1.6 to 2.5 Gigabits Per Second (GBPS) Serializer/Deserializer
● Hot Plug Protection
● High-Performance 64-Pin VQFP Thermally Enhanced Package (PowerPAD)
● 2.5-V Power Supply for Low-Power Operation
● Programmable Voltage Output Swing on Serial Output
● Interfaces to Back Plane, Copper Cables or Optical Converters
● On-Chip 8B/10B Encoding/Decoding, Comma and Synch
● On-Chip PLL Provides Clock Synthesis From Low-Speed Reference
● Receiver Differential Input Thresholds 200 mV Min
● Typical Power 350 mW
● 16-Bit Parallel LV TTL (3.3 V) Compatible Data Interface
● Transmitter Pre-Emphasis/De-Emphasis for Improved Signal Integraity
● Rated for Industrial Temperature Range
● Ideal for High-Speed Back Plane Interconnect and Point-to-Point Data Links


2345678910 Next

All Rights Reserved © 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]