datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : HD74ALVCH162831
Renesas
Renesas Electronics
Description : 1-BIT 4-BIT ADDRESS Register / DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 4-BIT ADDRESS register / DRIVER is designed for 2.3 V TO 3.6 V VCC operation. The device is ideal for use in applications in which a single ADDRESS bus is driving four separate memory locations.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need of
• Bus hold on data inputs eliminates the need of
• All OUTPUTS have equivalent 26 Ω series resisTOrs, so no external resisTOrs are required.

Part Name(s) : HD74ALVCH162831
Hitachi
Hitachi -> Renesas Electronics
Description : 1-BIT 4-BIT ADDRESS Register / DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 4-BIT ADDRESS register / DRIVER is designed for 2.3 V TO 3.6 V VCC operation. The device is ideal for use in applications in which a single ADDRESS bus is driving four separate memory locations.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resisTOrs.
• All OUTPUTS have equivalent 26 Ω series resisTOrs, so no external resisTOrs are required.

Part Name(s) : HD74ALVCH162830
Renesas
Renesas Electronics
Description : 1-BIT TO 2-bit ADDRESS DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 2-bit ADDRESS DRIVER is designed for 2.3 V TO 3.6 V VCC operation. TO ensure the high impedance state during power up or power down, OE should be tied TO VCC through a pullup resisTOr; the minimum value of the resisTOr is determined by the current sinking capability of the DRIVER. Active bus hold circuitry is provided TO hold unused or floating inputs at a valid logic level. All OUTPUTS, which are designed TO sink up TO 12 mA, include equivalent 26 Ω resisTOrs TO reduce overshoot and undreshoot.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resisTOrs
• All OUTPUTS have equivalent 26 Ω series resisTOrs, so no external resisTOrs are required

Part Name(s) : HD74ALVCH162830
Hitachi
Hitachi -> Renesas Electronics
Description : 1-BIT TO 2-bit ADDRESS DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 2-bit ADDRESS DRIVER is designed for 2.3 V TO 3.6 V VCC operation. TO ensure the high impedance state during power up or power down, OE should be tied TO V CC through a pullup resisTOr; the minimum value of the resisTOr is determined by the current sinking capability of the DRIVER. Active bus hold circuitry is provided TO hold unused or floating inputs at a valid logic level. All OUTPUTS, which are designed TO sink up TO 12 mA, include equivalent 26 Ω resisTOrs TO reduce overshoot and undreshoot.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resisTOrs
• All OUTPUTS have equivalent 26 Ω series resisTOrs, so no external resisTOrs are required

Part Name(s) : HD74ALVCH16830
Hitachi
Hitachi -> Renesas Electronics
Description : 1-BIT TO 2-bit ADDRESS DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 2-bit ADDRESS DRIVER is designed for 2.3 V TO 3.6 V VCC operation. TO ensure the high impedance state during power up or power down, the output ebable (OE) input should be tied TO VCC through a pullup resisTOr; the minimum value of the resisTOr is determined by the current sinking capability of the DRIVER. Active bus hold circuitry is provided TO hold unused or floating inputs at a valid logic level.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±24 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resisTOrs

Philips
Philips Electronics
Description : 7-bit TO 28-bit ADDRESS register/DRIVER WITH 3-STATE OUTPUTS

DESCRIPTION
This 7 channel 1-BIT TO 4-BIT ADDRESS register/DRIVER is designed for 2.3 V TO 3.6 V VCC operation. This device is ideal for use in applications in which a single ADDRESS bus is driving four separate memory locations. The 74ALVCH16832 can be used as a buffer or a register, depending on the logic level of the select (SEL) input.

FEATURES
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
• Latch-up testing is done TO JESDEC Standard JESD78 which exceeds 100 mA
• Bus hold on data inputs eliminates the need for external pullup/pulldown resisTOrs

Part Name(s) : HD74ALVCHS162830
Hitachi
Hitachi -> Renesas Electronics
Description : 1-BIT TO 2-bit ADDRESS DRIVER WITH 3-STATE OUTPUTS

Description
This 1-BIT TO 2-bit ADDRESS DRIVER is designed for 2.3 V TO 3.6 V VCC operation.
Diodes TO VCC have been added on the inputs TO clamp overshoot.

Features
• VCC = 2.3 V TO 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resisTOrs
• All OUTPUTS have equivalent 26 Ω series resisTOrs, so no external resisTOrs are required
• Diode on inputs clamp overshoot

NXP
NXP Semiconductors.
Description : 7-bit TO 28-bit ADDRESS register/DRIVER WITH 3-STATE OUTPUTS

DESCRIPTION
This 7 channel 1-BIT TO 4-BIT ADDRESS register/DRIVER is designed for 2.3 V TO 3.6 V VCC operation. This device is ideal for use in applications in which a single ADDRESS bus is driving four separate memory locations. The 74ALVCH16832 can be used as a buffer or a register, depending on the logic level of the select (SEL) input.

FEATURES
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
• Latch-up testing is done TO JESDEC Standard JESD78 which exceeds 100 mA
• Bus hold on data inputs eliminates the need for external pullup/pulldown resisTOrs

Fairchild
Fairchild Semiconductor
Description : 9-Bit Buffer/Line DRIVER WITH 3-STATE OUTPUTS

General Description
The 74FR9240 is an inverting 9-bit buffer and line DRIVER designed TO be employed as memory and ADDRESS DRIVER, clock DRIVER and bus oriented transmitter or receiver.

Features
3-STATE OUTPUTS drive bus lines or buffer memory ADDRESS registers
OUTPUTS sink 64 mA and source 15 mA
■ Guaranteed multiple output switching, 250 pF delay and pin-TO-pin skew
■ Guaranteed 4000V minimum ESD protection
■ 9-bit architecture for systems carrying parity

Fairchild
Fairchild Semiconductor
Description : 9-Bit Buffer/Line DRIVER WITH 3-STATE OUTPUTS

General Description
The 74FR9244 is a non-inverting 9-bit buffer and line DRIVER designed TO be employed as memory and ADDRESS DRIVER,clock DRIVER and bus-oriented transmitter/receiver.

Features
3-STATE OUTPUTS drive bus lines or buffer memory ADDRESS registers
OUTPUTS sink 64 mA and source 15 mA
■ Guaranteed multiple output switching, 250 pf delays and pin-TO-pin skew
■ Guaranteed 4000V minimum ESD protection
■ 9-Bit architecture for systems carrying parity

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]