datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications

Description
General
The HFBR-5208xxxZ (multimode transceiver) from Avago allow the system designer to implement a range of solutions for ATM/SONET STS-12/SDH STM-4 Applications.
The overall Avago transceiver consists of three sections: the transmitter and receiver Optical subassemblies, an electrical subassembly and the mezzanine package housing which incorporates a duplex SC connector receptacle.

Features
• Links of 500 m with 62.5/125 μm multimode fber (MMF) from 155-622 Mb/s
• RoHS compliant
• Compliant with ATM forum 622.08 Mb/s physical layer specifcation (AF-PHY-0046.000)
• Compliant with ANSI broadband ISDN - physical layer specifcation T1.646-1995 and T1.646a-1997
• HFBR-5208xxxZ is compliant with ANSI network to customer installation interfaces - synchronous Optical NETwork (SONET) physical media dependent specifcation: multimode fber T1.416.01-1998
• Industry-standard multi-sourced 1 x 9 mezzanine package style
• Single +5 V power supply operation and PECL logic interfaces
• Wave solder and aqueous wash process compatible

Applications
• General purpose low-cost MMF links at 155 to 650 Mb/s
• ATM 622 Mb/s MMF links from switch-to-switch or switch-to-server in the end-user premise
• Private MMF inter connections at 622 Mb/s SONET STS-12/SDH STM-4 rate

Description : Agilent HFBR/HFCT-5208M 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications

Description
General
The HFBR-5208M (multimode transceiver) and HFCT-5208M (single-mode transceiver) from Agilent allow the system designer to implement a range of solutions for ATM/SONET STS-12/SDH STM-4 Applications.

Features
• Performance
    HFBR-5208M:
        Links of 500 m with 62.5/125 µm multimode Fiber (MMF) from 155-622 Mb/s
    HFCT-5208M:
        Links of 15 km with 9/125 µm single-mode Fiber (SMF)   
• Compliant with ATM forum 622.08 Mb/s physical layer specification (AF-PHY-0046.000)
• Compliant with ANSI broadband ISDN - physical layer specification T1.646-1995 and T1.646a-1997
• HFBR-5208M is compliant with ANSI network to customer installation interfaces - synchronous Optical NETwork (SONET) physical media dependent specification: multimode Fiber T1.416.01-1998
• HFCT-5208M is compliant to the intermediate SONET OC12/SDH STM(S4.1) specifications
• Industry-standard multi-sourced 1 x 9 mezzanine package style
• Single +5 V power supply operation and PECL logic interfaces
• Wave solder and aqueous wash process compatible
• Unconditionally eye safe laser IEC 825/CDRH Class 1 compliant

Applications
HFBR-5208M:
• General purpose low-cost MMF links at 155 to 650 Mb/s
• ATM 622 Mb/s MMF links from switch-to-switch or switch-to-server in the end-user premise
• Private MMF interconnections at 622 Mb/s SONET STS-12/SDH STM-4 rate

HFCT-5208M:
• ATM 622 Mb/s SMF links from switch-to-switch or switch-toserver in the end-user premise
• Private SMF interconnections at 622 Mb/s SONET STS-12/SDH STM-4 rate

622 Mb/s Product Family
HFCT-5218M:
• 1300 nm laser-based transceiver in 1 x 9 package for links of 40 km with single-mode Fiber cables

Vitesse
Vitesse Semiconductor
Description : ATM/SONET/SDH 155/622 Mb/s Transceiver Mux/Demux with Integrated Clock Generation

General Description
The VSC8111 is an ATM/SONET/SDH compatible transceiver integrating an on-chip clock multiplication unit (PLL) for the high speed clock and 8 bit serial-to-parallel and parallel-to-serial data conversion. The high speed clock generated by the on-chip PLL is selectable for 155.52 or 622.08 MHz operation. The demultiplexer contains SONET/SDH frame detection and recovery. In addition, the device provides both facility and equipment loopback modes and two loop timing modes. The part is packaged in a 100 PQFP with an integrated heat spreader for optimum thermal performance and reduced cost. The VSC8111 provides an integrated solution for ATM physical layers and SONET/SDH systems Applications
   
Features
• Loss of Signal (LOS) Control
• Provides Equipment, Facilities and Split
    Loopback Modes as well as Loop Timing Mode
• Meets Bellcore, ITU and ANSI Specifications for
    Jitter Performance
• Single 3.3V Supply Voltage
• Low Power - 1.4 Watts Maximum
• 100 PQFP Package
• Operates at Either STS-3/STM-1 (155.52 Mb/s) or
    STS-12/STM-4 (622.08 Mb/s) Data Rates
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 155.52 Mhz
    or 622.08 Mhz High Speed Clock
• Dual 8 Bit Parallel TTL Interface
• SONET/SDH Frame Detection and Recovery
   

Description : ATM/SONET/SDH 155/622 Mb/s Transceiver Mux/Demux with Integrated Clock Generation

General Description
The VSC8110 is an ATM/SONET/SDH compatible transceiver integrating high speed clock generation with 8 bit serial-to-parallel and parallel-to-serial data conversion. The high speed clock is generated using an on-chip PLL which is selectable for 155.52 or 622.08 Mhz operation. The part can be used with 19.44, 38.88, 51.84 or 77.76 Mhz external reference clocks. The demultiplexer contains SONET/SDH frame detection and recovery. In addition, the device provides both facility and equipment loopback modes. The part is packaged in a 100PQFP with integrated heat spreader for optimum thermal performance and reduced cost. The VSC8110 provides an integrated solution for ATM physical layers and SONET/SDH systems Applications.

Features
• Integrated PLL for Clock Generation - No External Components
• SONET/SDH Frame Recovery
• Provides Equipment and Facilities Loopback
• Low Power - 1.98 Watts Maximum
• Dual Supply Operation- +2, +5 Volts
• 100 PQFP Package
• Operates at Either STS-3/STM-1 (155.52 Mb/s) or STS-12/STM-4 (622.08 Mb/s) Data Rates
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 155.52 Mhz or 622.08 Mhz High Speed Clock
• Reference Clock Frequencies Selectable for 19.44, 38.88, 51.84 and 77.76 Mhz
• 8 bit Parallel TTL Interface

Vitesse
Vitesse Semiconductor
Description : ATM/SONET/SDH 622 Mb/s Transceiver Mux/Demux with Integrated Clock Generation and Clock Recovery

General Description
The VSC8114 is an ATM/SONET/SDH compatible transceiver integrating an on-chip Clock Multiplication Unit (PLL) for high speed clock generation as well as a Clock and data Recovery Unit (CRU) with 8-bit serial-to-parallel and parallel-to-serial data conversion. The PLL clock is used for serialization in the transmit direction (Mux). The recovered clock is used for deserialization in the receive direction (Demux). The demultiplexer contains SONET/SDH frame detection and recovery. In addition, the device provides both facility and equipment loopback modes and a loop time mode. The part is packaged in a 100PQFP with an integrated heat spreader for optimum thermal performance and reduced cost. The VSC8114 provides an integrated solution for ATM physical layers and SONET/SDH systems Applications.
   
Features
• Loss of Signal (LOS) Input & LOS Detection
• +3.3V/5V Programmable PECL Serial Interface
• Provides Equipment, Facilities and Split
    Loopback Modes as well as Loop Timing Mode
• Provide PECL Reference Clock Inputs
• Meets Bellcore, ITU and ANSI Specifications
    for Jitter Performance
• Low Power - 0.9Watts Typical
• 100 PQFP Package
• Operates at STS-12/STM-4 (622.08Mb/s)
    Data Rate
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 622.08MHz
    High Speed Clock (Mux)
• On Chip Clock Recovery of the 622.08MHz
    High Speed Clock (Demux)
• 8-Bit Parallel TTL Interface with Parity Error
    Detection and Generation
• SONET/SDH Frame Recovery
   

Vitesse
Vitesse Semiconductor
Description : ATM/SONET/SDH 622/155Mb/s Transceiver Mux/Demux with Integrated Clock Generation

General Description
The VSC8116 is an ATM/SONET/SDH compatible transceiver integrating an on-chip clock multiplication unit (PLL) for the high speed clock and 8 bit serial-to-parallel and parallel-to-serial data conversion. The high speed clock generated by the on-chip PLL is selectable for 155.52 or 622.08 MHz operation. The demultiplexer contains SONET/SDH frame detection and recovery. In addition, the device provides both facility and equipment loopback modes and loop timing modes. The part is packaged in a 64 PQFP with an integrated heat spreader for optimum thermal performance and reduced cost. The VSC8116 provides an integrated solution for ATM physical layers and SONET/SDH systems Applications.
   
Features
• Loss of Signal (LOS) Control
• Provides Equipment, Facilities and Split
    Loopback Modes as well as Loop Timing Mode
• Meets Bellcore, ITU and ANSI Specifications for
    Jitter Performance
• Single 3.3V Supply Voltage
• Low Power - 1.2 Watts Maximum
• 64 PQFP Package
• Operates at Either STS-3/STM-1 (155.52 Mb/s) or
    STS-12/STM-4 (622.08 Mb/s) Data Rates
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 155.52 Mhz
    or 622.08 Mhz High Speed Clock
• Dual 8 Bit Parallel TTL Interface
• SONET/SDH Frame Detection and Recovery
   

Vitesse
Vitesse Semiconductor
Description : ATM/SONET/SDH 622/155 Mb/s Transceiver Mux/Demux with Integrated Clock Generation and Clock Recovery

General Description
The VSC8117 is an ATM/SONET/SDH compatible transceiver integrating an on-chip Clock Multiplication Unit (PLL) for the high speed clock as well as a clock and data recovery unit (CRU) with 8 bit serial-to-parallel and parallel-to-serial data conversion. The PLL clock is used for serialization in the transmit direction (Mux). The recovered clock is used for deserialization in the receive direction (Demux). The demultiplexer contains SONET/SDH frame detection and recovery. The device provides facility loopback, equipment loopback, and loop timing modes. The part is packaged in a 64-pin PQFP with integrated heat spreader for optimum thermal performance and reduced cost. The VSC8117 provides an integrated solution for ATM physical layers and SONET/SDH systems Applications.
   
Features
• +3.3V/5V programmable PECL Serial Interface
• Provides Equipment, Facilities and Split
    Loopback Modes as well as Loop Timing Mode
• Provides TTL and PECL reference clock inputs
• Meets Bellcore, ITU and ANSI Specifications for
    Jitter Performance
• Low Power - 1.0 Watts Typical
• 64 PQFP Package
• Operates at Either STS-3/STM-1 (155.52Mb/s)
    or STS-12/STM-4 (622.08Mb/s) Data Rates
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 155.52MHz
    or 622.08MHz High Speed Clock (Mux)
• On Chip Clock Recovery of the 155.52MHz or
    622.08MHz High Speed Clock (Demux)
• 8 Bit Parallel TTL Interface
• SONET/SDH Frame Recovery
• Loss of Signal (LOS) Input & LOS Detection
   

Vitesse
Vitesse Semiconductor
Description : ATM/SONET/SDH 622 Mb/s Transceiver Mux/Demux with Integrated Clock Generation and Clock Recovery

General Description
The VSC8113 is an ATM/SONET/SDH compatible transceiver integrating an on-chip Clock Multiplication Unit (PLL) for the high speed clock as well as a clock and data recovery unit (CRU) with 8 bit serial-to-parallel and parallel-to-serial data conversion. The PLL clock is used for serialization in the transmit direction (Mux).
   
Features
• Loss of Signal (LOS) Input & LOS Detection
• +3.3V/5V programmable PECL Serial Interface
• Provides Equipment, Facilities and Split Loopback Modes as well as Loop Timing Mode
• Provide TTL & PECL reference clock inputs
• Meets Bellcore, ITU and ANSI Specifications for
    Jitter Performance
• Low Power - 1.0 Watts Typical
• 100 PQFP Package
• Operates at Either STS-3/STM-1 (155.52Mb/s)
    or STS-12/STM-4 (622.08Mb/s) Data Rates
• Compatible with Industry ATM UNI Devices
• On Chip Clock Generation of the 155.52MHz
    or 622.08MHz High Speed Clock (Mux)
• On Chip Clock Recovery of the 155.52MHz or
    622.08MHz High Speed Clock (Demux)
• 8 Bit Parallel TTL Interface
• SONET/SDH Frame Recovery
• Lock Detect for both CRU and CMU
   

Description : 622 Mb/s Logic Interface Laser Transmitter

Description
The XMT5160B-622 laser transmitter is a high performance uncooled Optical transmitter for CCITT SDH and ANSI SONET Applications. It is designed with an ECL/PECL logic interface for 622 Mb/s transmission.

Features
• SONET/SDH Compliant to STM4 L-4.1 OC12 LR-1
• 0°C to +70°C Operation
• Compact 20 Pin Package
• ECL/PECL Logic Interface
• Multisourced Pinout

Applications
• SONET/SDH Systems
Fiber to the Home
• Data Communications Networks

Description : ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style

Description
The HFBR-5200 family of Transceivers from Hewlett-Packard provide the system designer with products to implement a range of solutions for multimode Fiber SONET OC-3 (SDH STM-1) physical layers for ATM and other services.

Features
• Full Compliance with ATM forum UNI SONET OC-3 Multimode Fiber Physical Layer Specification
• Multisourced 1 x 9 Package Style with Choice of Duplex SC or Duplex ST* Receptacle
• Wave Solder and Aqueous Wash Process Compatibility
• Manufactured in an ISO 9002 Certified Facility

Applications
• Multimode Fiber ATM Backbone Links
• Multimode Fiber ATM Wiring Closet to Desktop Links
• Very Low Cost Multimode Fiber 800 nm ATM Wiring Closet to Desktop Links
• ATM 155 Mbps/194 MBd Encoded Links (available upon special request)

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]