datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 0.5 AMP SIP3 Single Output

Description
The R-78xx-Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. Low ripple and noise figures and short circuit , over load and over-temperature protection round off the specifications of this versatile converter series. This R-78xx-0.5 is fully certified to EN 55022 (Emissions), and EN55024 (Immunity) EMC Standards and for EN-60.50-1 Safety.

Features
● Efficiency up to 97%,Non isolated, no need for heatsinks
● Pin-out compatible with LM78XX Linears
● Very low profile( L*W*H=11.5*7.5*10.2 )
● Wide input range.(4.75V ~ 32V)
● Short circuit protection, Thermal shutdown
● Non standard Outputs available as specials
● Low ripple and noise
● UL94V-0 package material
● EMC, Safety Certified
● See Innoline Application Notes for use as an inverter (alternative to LM79xx Linear)

 

Description : 1.0 AMP SIP3 Single Output

Description
The R-78xx-1.0 series high efficiency switching regulators are ideally suited to replace 1 AMP 78xx linear regulators and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. Low ripple and noise figures and a short circuit input current of typically only 10mA round off the specifications of this versatile converter series.

Features
● Efficiency up to 94%, non-isolated, no need for heatsinks!
● Pin-out compatible with LM78XX Linears
● Very low profile (L*W*H=11.5*7.5*10.2mm)
● Wide input range (4.75V ~ 18V)
● Short circuit protection, thermal shutdown
● UL94V-0 Package Material
● Non standard Outputs available as specials between 1.5V ~5.5V
● Low ripple and noise

Description : 0.5 AMP SIP3 Single Output

Description
The R-78xx-Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. Low ripple and noise figures and a short circuit input current of typically only 7mA round off the specifications of this versatile converter series.
This R-78xx-0.5 is fully certified to EN 60601-1-2 (Medical Equipment), EN 55022 (Emissions), and EN55024 (Immunity) EMC Standards.

Features
● Efficiency up to 97%,Non isolated, no need for heatsinks
● Pin-out compatible with LM78XX Linears
● Very low profile( L*W*H=11.5*7.5*10.2 )
● Wide input range.(4.75V ~ 34V)
● Short circuit protection, Thermal shutdown
● Non standard Outputs available as specials between 1.5V ~15.5V
● Low ripple and noise
● UL94V-0 Package Material
● EMC Certified
● See Positive-to Negative Converter Application Note for use as a voltage inverter (alternative to LM79xx Linear)

 

Description : 1.5 AMP SIP3 Single Output

Description
The R-78Bxx-1.5 Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators and are pin compatible. The efficiency of up to 95% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. The L-Version with 90° pins allows direct replacement for laid-flat regulators where component height is at a premium.Low ripple and noise figures and a short circuit input current of typically only 10mA round off the specifications of this versatile converter series.

Features
● Efficiency up to 95%,Non isolated, no need for heatsinks
● Pin-out compatible with LM78XX Linears
● Low profile( L*W*H=11.5*8.5*17.5mm)
● Wide input range.(4.75V ~ 18V)
● Short circuit protection, Thermal shutdown
● Non standard Outputs available as specials between 1.5V ~ 6.5V
● Low ripple and noise
● “L” Version with 90° pins

 

Description : 0.5 AMP SIP3 Single Output

Description
The R-78HBxx-Series high efficiency, high input voltage switching regulators are ideally suited to replace 78xx linear regulators and are pin compatible. The efficiency of up to 96% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs.

Features
● Efficiency up to 96%,Non isolated, no need for heatsinks
● Pin-out compatible with LM78XX Linears
● Low profile( L*W*H=11.5*8.5*17.5mm)
● High voltage input range, up to 72V
● Short circuit protection, Thermal shutdown
● Non standard Outputs available as specials between 3.3V~24V
● Low ripple and noise
● ”L” version with 90° pins
● See Positive to Negative Converter Application Note for use as a voltage inverter (alternative to LM79xx Linear)

Description : Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op AMP

Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op AMP

The ISL28288 and ISL28488 are dual and quad channel micropower operational AMPlifiers optimized for Single supply operation over the 2.4V to 5.5V range. They can be operated from one lithium cell or two Ni-Cd batteries. For equivalent performance in a Single channel op AMP, reference EL8188.

Features
• Low power 60µA typical supply current per AMPlifier
• 1.5mV max offset voltage
• 30pA max input bias current
• 250kHz typical gain-bandwidth product
• 105dB typical PSRR
• 100dB typical CMRR
Single supply operation down to 2.4V
• Input is capable of swinging above V+ and below V- (ground sensing)
• Rail-to-rail input and Output (RRIO)
• Enable Pin - ISL28288 10 Ld MSOP package option only
• Pb-free (RoHS compliant)

Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
• Thermocouple AMPlifiers
• Photodiode pre-AMPs
• pH probe AMPlifiers

Description : Single, Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op AMP

Single, Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op AMP

The ISL28176, ISL28276 and ISL28476 are Single, dual and quad channel micropower operational AMPlifiers optimized for Single supply operation over the 2.4V to 5V range. They can be operated from one lithium cell or two Ni-Cd batteries.

Features
• Low power 120µA typical supply current (ISL28276)
• 100µV maximum offset voltage
• 500pA typical input bias current
• 400kHz typical gain-bandwidth product
• 115dB typical PSRR and CMRR
Single supply operation down to 2.4V
• Input is capable of swinging above V+ and to V- (ground sensing)
• Rail-to-rail input and Output (RRIO)
• Pb-free (RoHS compliant)

Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
• Thermocouple AMPlifiers
• Photodiode pre-AMPs
• pH probe AMPlifiers

Description : Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-AMP

Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-AMP

The ISL28288 and ISL28488 are dual and quad channel
micropower operational AMPlifiers optimized for Single
supply operation over the 2.4V to 5V range. They can be
operated from one lithium cell or two Ni-Cd batteries. For
equivalent performance in a Single channel op-AMP
reference EL8188.

Features
• Low power 120µA typical supply current
• 1.5mV max offset voltage
• 30pA max input bias current
• 300kHz typical gain-bandwidth product
• 105dB typical PSRR
• 100dB typical CMRR
Single supply operation down to 2.4V
• Input is capable of swinging above V+ and below V- (ground sensing)
• Rail-to-rail input and Output (RRIO)
• Enable Pin (ISL28288 only)
• Pb-free plus anneal available (RoHS compliant)

Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
• Thermocouple AMPlifiers
• Photodiode pre-AMPs
• pH probe AMPlifiers

Description : Micropower Single Supply Rail-to-Rail Input-Output Op AMP

Micropower Single Supply Rail-to-Rail Input-Output Op AMP

The EL8186 is a micropower operational AMPlifier optimized for Single supply operation at 5V and can operate down to 2.4V.

Features
• 55µA supply current
• 400µV typical offset voltage
• 500pA input bias current
• 400kHz gain-bandwidth product
• 1MHz -3dB bandwidth
• 0.13V/µs slew rate
Single supply operation down to 2.4V
• Rail-to-rail input and Output
Output sources and sinks 26mA load current

Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
• Thermocouple AMPlifiers
• Photodiode pre AMPs
• pH probe AMPlifiers

Description : DUAL/Single Output DC-DC CONVERTER

0.25W, FIXED INPUT, ISOLATED & UNREGULATED
DUAL/Single Output DC-DC CONVERTER
UTRALMINIATURE SMD PACKAGE

FEATURES
    Single Voltage Output
    SMD Package Style
    Industry Standard Pinout
    No Heat sink Required
    3KVDC Isolation
    High Power Density
    Internal SMD construction
    Temperature Range: -40°C~+85°C
    No External Component Required
    RoHS Compliance

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]