datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
HOME  >>>  Spansion  >>> S25FL128P PDF

S25FL128P Datasheet PDF - Spansion Inc.

Part NameDescriptionManufacturer
S25FL128P 128 Megabit CMOS 3.0 Volt Flash Memory with 104-MHz SPI (Serial Peripheral Interface) Bus Spansion
Spansion Inc. Spansion
Other PDF  no available.
S25FL128P Datasheet PDF : S25FL128P pdf   
S25FL128P image

General Description
The S25FL128P is a 3.0 Volt (2.7V to 3.6V), single-power-supply Flash memory device. The device consists of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory.
The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The devices are designed to be programmed in-system with the standard system 3.0 volt VCC supply.
The memory can be programmed 1 to 256 bytes at a time, using the Page Program command. The device supports Sector Erase and Bulk Erase commands.

Distinctive Characteristics
Architectural Advantages
 Single power supply operation
   – Full voltage range: 2.7V to 3.6V read and program operations
 Memory Architecture
   – 128Mb uniform 256 KB sector product
   – 128Mb uniform 64 KB sector product
 Program
   – Page Program (up to 256 bytes) in 1.5 ms (typical)
   – Faster program time in Accelerated Programming mode(8.5 V–9.5 V on #WP/ACC) in 1.2 ms (typical)
 Erase
   – 2 s typical 256 KB sector erase time
   – 0.5 s typical 64 KB sector erase time
   – 128 s typical bulk erase time
   – Sector erase (SE) command (D8h) for 256 KB sectors; (20h or D8h) for 64KB sectors
   – Bulk erase command (C7h) for 256 KB sectors; (60h or C7h) for 64KB sectors
 Cycling Endurance
   – 100,000 cycles per sector typical
 Data Retention
   – 20 years typical
 Device ID
   – RDID (9Fh), READ_ID (90h) and RES (ABh) commands to read manufacturer and device ID information
   – RES command one-byte electronic signature for backward compatibility
 Process Technology
   – Manufactured on 0.09 µm MirrorBit® process technology
 Package Option
   – Industry Standard Pinouts
   – 16-pin SO package (300 mils)
   – 8-Contact WSON Package (6 x 8 mm)

Performance Characteristics
 Speed
   – 104 MHz clock rate (maximum)
 Power Saving Standby Mode
   – Deep Power Down Mode 3 µA (typical)
   – Standby Mode 200 µA (max)

Memory Protection Features
 Memory Protection
   – WP#/ACC pin works in conjunction with Status Register Bits to protect specified memory areas
   – 256 KB uniform sector product:
     Status Register Block Protection bits (BP2, BP1, BP0) in status
     register configure parts of memory as read-only.
   – 64KB uniform sector product:
     Status Register Block Protection bits (BP3, BP2, BP1, BP0) in
     status register configure parts of memory as read-only

Software Features
– SPI Bus Compatible Serial Interface

Hardware Features
 x8 Parallel Programming Mode (for 16-pin SO package only)

 

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49 

 

Other manufacturer searches related to S25FL128P

Part NameDescriptionPDFManufacturer
M25P128 128 Mbit (Multilevel), low-voltage, Serial Flash memory with 50-MHz SPI bus interface M25P128 View STMicroelectronics
M25P128 128 Mbit (Multilevel), low-voltage, Serial Flash memory with 50-MHz SPI bus interface M25P128 View Numonyx -> Micron
M25P05-VMN6T 512 Kbit, Low Voltage, Serial Flash Memory With 20 MHz SPI Bus Interface M25P05-VMN6T View STMicroelectronics
AM29F010-1 1 Megabit (128 K x 8-Bit) CMOS 5.0 Volt-only, Uniform Sector Flash Memory—Die Revision 1 AM29F010-1 View Advanced Micro Devices
M25P10 1 Mbit Low Voltage Paged Flash Memory With 20 MHz Serial SPI Bus Interface M25P10 View STMicroelectronics
AT25DF321 32-megabit 2.7-volt Minimum SPI Serial Flash Memory AT25DF321 View Atmel Corporation
AM29LV200 2 Megabit (256 K x 8-Bit/128 K x 16-Bit) CMOS 3.0 volt-only boot sector flash memory AM29LV200 View Advanced Micro Devices
IS25LQ080 8 Mbit Single Operating Voltage Serial Flash Memory With 104 MHz Dual- or 100MHz Quad-Output SPI Bus Interface IS25LQ080 View Integrated Silicon Solution
PM25LV010 512 Kbit / 1 Mbit 3.0 Volt-only, Serial Flash Memory With 25 MHz SPI Bus Interface PM25LV010 View PMC-Sierra
NM25C041 4K-Bit Serial Interface CMOS EEPROM (Serial Peripheral Interface (SPI™) Synchronous Bus) NM25C041 View Fairchild Semiconductor

Share Link : 

한국어 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]